Hello,
In the dhcp-server pool option 66 will provision the phones. If I add a line for option 129 will it add the vlan to the phone provisioning automatically. If so would it be option 129 hex ----------- and how would I translate the hex part.
Thanks,
Joe
Joe this what I use on a Cisco 2600 router for Mitel Phones
ip dhcp pool Cortez_phone
network 192.168.3.0 255.255.255.0
default-router 192.168.3.1
option 128 hex c0a8.0102
option 129 hex c0a8.0102
option 130 ascii "MITEL IP PHONE"
lease infinite
Thanks Rodney
Joe this what I use on a Cisco 2600 router for Mitel Phones
ip dhcp pool Cortez_phone
network 192.168.3.0 255.255.255.0
default-router 192.168.3.1
option 128 hex c0a8.0102
option 129 hex c0a8.0102
option 130 ascii "MITEL IP PHONE"
lease infinite
Thanks Rodney
Thank you. I will try this tomorrow. Did the Mitel phones provision or did you still have to go into the phone menu to allow option 129? What I am getting at is trying to accomplish "zero" touch provisioning for my end users. Once again thank you in advance.
nope the phone have the options burned into the boot up firmware
hope this helps
your welcome
Rodney
Meyerj66,
I went ahead and flagged this post as "Assumed Answered" since it appears Rodney helped you out. If any of the responses on this thread assisted you, please mark them as Correct or Helpful as the case may be with the applicable buttons. This will make them visible and help other members of the community find solutions more easily. If you still need assistance, I would be more than happy to continue working with you on this - just let me know in a reply.
Thanks!
David