VLAN ID Discovery (option 129)

[Anonymous]

Hello,

In the dhcp-server pool option 66 will provision the phones. If I add a line for option 129 will it add the vlan to the phone provisioning automatically. If so would it be option 129 hex ----------- and how would I translate the hex part.

Thanks,

Joe

[Anonymous · Accepted solution]

Joe this what I use on a Cisco 2600 router for Mitel Phones

ip dhcp pool Cortez_phone

   network 192.168.3.0 255.255.255.0

   default-router 192.168.3.1

   option 128 hex c0a8.0102

   option 129 hex c0a8.0102

   option 130 ascii "MITEL IP PHONE"

   lease infinite

Thanks Rodney

[Anonymous]

Thank you. I will try this tomorrow. Did the Mitel phones provision or did you still have to go into the phone menu to allow option 129? What I am getting at is trying to accomplish "zero" touch provisioning for my end users. Once again thank you in advance.

[Anonymous]

nope the phone have the options burned into the boot up firmware

hope this helps

your welcome

Rodney

[Anonymous]

Meyerj66,

I went ahead and flagged this post as "Assumed Answered" since it appears Rodney helped you out.  If any of the responses on this thread assisted you, please mark them as Correct or Helpful as the case may be with the applicable buttons.  This will make them visible and help other members of the community find solutions more easily.  If you still need assistance, I would be more than happy to continue working with you on this - just let me know in a reply.

Thanks!

David