Adtran
Help
The Adtran community holiday season is starting next week! The holiday period will span from December 21, 2024 to January 6, 2025. During this time, responses to feedback form submissions may be delayed. If you are encountering product issues, you can reach out to Adtran support at any time.
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Show  only  | Search instead for 
Did you mean: 
tech01
New Contributor
‎10-22-2022 04:21 PM

Total Access 908e 2nd Gen Firmware Reinstallation

Jump to solution

I'm having an issue reinstalling the firmware on a 908e 2nd Gen.

I am currently stuck with the message "Timed out waiting on packet" after I set the IP and initiate the copy tftp flash command. What I've noticed is the eth 0/1 port is lit up and my laptop does see a connection.

Is there any way to ping the laptop / tftp server from bootstrap (I've already wiped the system using "erase file-system" prior) to see if the connection is there? Any other advice would be appreciated.

0 Kudos
Reply
1 Solution

Accepted Solutions
commsunlimited1971
New Contributor II
‎10-31-2022 10:13 PM

Re: Total Access 908e 2nd Gen Firmware Reinstallation

Jump to solution

1st break the boot mode

add

ip address 192.168.10.222 255.255.255.0
ip route 0.0.0.0 0.0.0.0 0.0.0.0

 

in config mode, enter this command, this will set your ETH1 to 192.168.10.122 and gateway to 0.0.0.0 after you should be able to get to your machine

View solution in original post

0 Kudos
Reply
1 Reply
commsunlimited1971
New Contributor II
‎10-31-2022 10:13 PM

Re: Total Access 908e 2nd Gen Firmware Reinstallation

Jump to solution

1st break the boot mode

add

ip address 192.168.10.222 255.255.255.0
ip route 0.0.0.0 0.0.0.0 0.0.0.0

 

in config mode, enter this command, this will set your ETH1 to 192.168.10.122 and gateway to 0.0.0.0 after you should be able to get to your machine

0 Kudos
Reply