Adtran
Help
The Adtran community holiday season is starting next week! The holiday period will span from December 21, 2024 to January 6, 2025. During this time, responses to feedback form submissions may be delayed. If you are encountering product issues, you can reach out to Adtran support at any time.
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Show  only  | Search instead for 
Did you mean: 
cnelson5506
New Contributor
‎12-16-2022 03:52 PM

Setting up FXO Trunk for incoming DID's

We have a business customer that we drop off 4 pots lines and 4 FXO Trunk lines. The FXO lines are connected from our switch to a channel bank then across copper to the customer cisco phone system. Currently the customer has the 4 FXO lines as incoming DID's, we would like to get rid of the channel bank and install this 924e that has FXOs. How do you setup the adtran to receive DID's to the FXOs ports?

0 Kudos
Reply
1 Reply
droop
New Contributor
‎01-09-2024 12:56 PM

Re: Setting up FXO Trunk for incoming DID's

Did you ever find a fix for this?  I'm trying the same scenario with a 624 MGCP FXO ports and an old NEC PBX.  The current adtran is on a T1 and ports are set as DPT.  I've worked with the provider and not able to get this setup to work.

If needed I could order a 924 with the FXO ports if it will work.

0 Kudos
Accept as Solution Reply