I'm in a pickle. I rebooted a Netvanta 1238 3rd gen and it didn't come up. Long story short, I fashioned a DB9 console connection from other posts and saw I am stuck at bootstrap. I get some characters, but still a lot of garbage. Anyway, I can't tell what image is loaded due to the console output. Is there a way to set this to default. I copied the config before the reboot.
Thanks!
I made a third attempt with a different terminal emulator, terra term. Performed an xmodem transfer with N123Xv2A-R11-10-1.biz and was able to boot from it. Thanks goodness I had a backup of the config.
Update... I have been able to get get the correct pinout for the console...no more garbage. I took a look at the dir and saw...
bootstrap#dir
Alloced from 0x00088490 - Bytes used = 464640
96: 1582
262112: 1
Alloced from 0x00000001 - Bytes used = 137216
32: 16
96: 4
480: 1
992: 2
2016: 1
8160: 6
16352: 3
32736: 1
Alloced from 0x00216E90 - Bytes used = 103488
32: 1583
96: 1
2016: 1
Alloced from 0x000B4C3C - Bytes used = 16384
16352: 1
Alloced from 0x00219218 - Bytes used = 16384
16352: 1
Alloced from 0x001EC558 - Bytes used = 8320
32: 2
8160: 1
Alloced from 0x0001E35C - Bytes used = 5120
480: 10
Alloced from 0x001D1934 - Bytes used = 4160
32: 1
4064: 1
Alloced from 0x00500052 - Bytes used = 4096
4064: 1
Alloced from 0x00218AD0 - Bytes used = 2368
32: 1
96: 2
992: 2
Alloced from 0x001DC010 - Bytes used = 2304
32: 2
96: 1
2016: 1
Alloced from 0x00000000 - Bytes used = 2240
32: 25
96: 3
224: 1
Alloced from 0x000B460C - Bytes used = 2048
2016: 1
Alloced from 0x0007DA7C - Bytes used = 1408
96: 11
Alloced from 0x001DC458 - Bytes used = 1024
992: 1
Alloced from 0x001DC758 - Bytes used = 1024
992: 1
Alloced from 0x0000030A - Bytes used = 1024
992: 1
Alloced from 0x000C25FD - Bytes used = 1024
992: 1
Alloced from 0x001ECF58 - Bytes used = 1024
992: 1
Alloced from 0x00219458 - Bytes used = 1024
992: 1
Alloced from 0x00221458 - Bytes used = 1024
992: 1
Alloced from 0x0004AEF4 - Bytes used = 1024
992: 1
Alloced from 0x001E5F90 - Bytes used = 640
32: 10
Alloced from 0x001F1BD0 - Bytes used = 576
32: 5
96: 2
Alloced from 0x001CAD1E - Bytes used = 576
!!!
Next I erased the flash and attempted to load a new image via modem...
bootstrap#copy xmodem flash
Destination filename?N123Xv2A-R11-10-1.biz
Begin the Xmodem transfer now...
Press CTRL+X twice to cancel
CCC
### Send N123Xv2A-R11-10-1.biz: 7436160 bytes, 1:08:27 elapsed, 1810 cps, 15
%
Received 7436160 bytes.
Transfer complete.
bootstrap#dir flash
% Invalid or incomplete command
bootstrap#dir
7436160 N123Xv2A-R11-10-1.biz
7439010 bytes used, 24201405 available, 31640415 total
bootstrap#boot system flash N123Xv2A-R11-10-1.biz
%Unknown header version, ignoring...
Bad file signature.
'NONVOL:/N123Xv2A-R11-10-1.biz' is not a valid image.
Primary image error. Primary boot configuration not updated!!!
!!!
Then I performed another modem transfer with a different image...
bootstrap#copy xmodem flash
Destination filename?NV123XA-18-01-08-00.biz
Begin the Xmodem transfer now...
Press CTRL+X twice to cancel
CCCCC
### Send NV123XA-18-01-08-00.biz: 4665600 bytes, 43:21 elapsed, 1793 cps, 15
%
Received 4665600 bytes.
Transfer complete.
bootstrap#boot system flash NV123XA-18-01-08-00.biz
%Unknown header version, ignoring...
Bad file signature.
'NONVOL:/NV123XA-18-01-08-00.biz' is not a valid image.
Primary image error. Primary boot configuration not updated!!!
!!!
This is a Netvanta 1238P, but the boot rom reports it as a 1234...
bootstrap#show version
Boot ROM version XB.01.03
Checksum: 3B20, built on: Fri Dec 05 07:38:29 2014
Compatibility Version: 1
Copyright (c) 1999-2014, ADTRAN, Inc.
Platform: NetVanta 1234, Part number 1702594G1
Serial number LBADTN1449AH458
Which image can I load to get this thing to boot???!!!
Thanks for helping!
I made a third attempt with a different terminal emulator, terra term. Performed an xmodem transfer with N123Xv2A-R11-10-1.biz and was able to boot from it. Thanks goodness I had a backup of the config.