Adtran
Help
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Show  only  | Search instead for 
Did you mean: 
drjarmon
New Contributor III
‎06-25-2015 04:34 PM

How change n-command polling script?

Getting checksum mismatch warnings.  It was determined that the command show file /start-config checksum needs to be show file startup-config checksum.  Where do you change this in n-command?

AdtranNMS polling script needs to be updated:

  1. 2015.06.03 18:32:00 SSH:0> terminal length 0
  2. 2015.06.03 18:32:00 SSH:0> ena
  3. 2015.06.03 18:32:00 OPERATING_SYSTEM.SESSION User management ENABLE OK on portal SSH 0
  4. 2015.06.03 18:32:01 SSH:0> terminal length 0
  5. 2015.06.03 18:32:01 SSH:0> no events
  6. 2015.06.03 18:32:01 SSH:0> show cflash
  7. 2015.06.03 18:32:01 SSH:0> show version
  8. 2015.06.03 18:32:02 SSH:0> write memory
  9. 2015.06.03 18:32:03 SSH:0> show dynvoice-config checksum       ! Removed this command
  10. 2015.06.03 18:32:04 SSH:0> show running-config checksum
  11. 2015.06.03 18:32:05 SSH:0> show file /startup-config checksum  ! Change to: show startup-config checksum
  12. 2015.06.03 18:32:05 SSH:0> show flash exception-report*

Thanks

0 Kudos
Reply