Seeing Errored seconds and Controlled Slip seconds TA-908

[nooksr]

The version that I am seeing the subject scenario is OS version R10.9.4.E.

2015.09.15 12:41:58 PPP.NEGOTIATION LCP up

2015.09.15 12:41:58 PPP.ERRORS Multilink is not enabled at the ppp destination

2015.09.15 12:41:58 PPP.NEGOTIATION LCP down

2015.09.15 12:42:08 PPP.NEGOTIATION LCP up

2015.09.15 12:42:08 PPP.ERRORS Multilink is not enabled at the ppp destination

2015.09.15 12:42:08 PPP.NEGOTIATION LCP down

2015.09.15 12:42:18 PPP.NEGOTIATION LCP up

2015.09.15 12:42:18 PPP.ERRORS Multilink is not enabled at the ppp destination

2015.09.15 12:42:18 PPP.NEGOTIATION LCP down

2015.09.15 12:42:24 T1.t1 0/3 CSS 24 hr threshold exceeded

2015.09.15 12:42:28 PPP.NEGOTIATION LCP up

2015.09.15 12:42:28 PPP.ERRORS Multilink is not enabled at the ppp destination

2015.09.15 12:42:28 PPP.NEGOTIATION LCP down

2015.09.15 12:42:38 PPP.NEGOTIATION LCP up

2015.09.15 12:42:38 PPP.ERRORS Multilink is not enabled at the ppp destination

2015.09.15 12:42:38 PPP.NEGOTIATION LCP down

2015.09.15 12:42:48 PPP.NEGOTIATION LCP up

2015.09.15 12:42:48 PPP.ERRORS Multilink is not enabled at the ppp destination

2015.09.15 12:42:48 PPP.NEGOTIATION LCP down

2015.09.15 12:42:58 PPP.NEGOTIATION LCP up

2015.09.15 12:42:58 PPP.ERRORS Multilink is not enabled at the ppp destination

2015.09.15 12:42:58 PPP.NEGOTIATION LCP down

2015.09.15 12:43:07 PPP.NEGOTIATION LCP up

2015.09.15 12:43:07 PPP.ERRORS Multilink is not enabled at the ppp destination

2015.09.15 12:43:07 PPP.NEGOTIATION LCP down

2015.09.15 12:43:17 PPP.NEGOTIATION LCP up

2015.09.15 12:43:17 PPP.ERRORS Multilink is not enabled at the ppp destination

2015.09.15 12:43:17 PPP.NEGOTIATION LCP down

Current Performance Statistics:

    60 Errored Seconds, 0 Bursty Errored Seconds

    0 Severely Errored Seconds, 0 Severely Errored Frame Seconds

    0 Unavailable Seconds, 0 Path Code Violations

    0 Line Code Violations, 60 Controlled Slip Seconds

    0 Line Errored Seconds, 0 Degraded Minutes

Ultimately this is preventing the TA-908 from syncing up with my Cisco7613.   I have tried almost every response from the community boards and none of them have worked so far.  I do not have a PBX with the router, and timing sources were both implemented within the router.  The web GUI was disabled before the router was shipped out to the customer.  Please advise your best advice.

Thanks,

Robert Nooks

Data Implementation

614-973-6383

[Anonymous]

I don't think the TA series supports independent clock sources on the T1's so they all need the same reference.  I assume you want to  get clock from the Cisco?

!

interface ppp 1

  ip address  1.1.1.1 255.255.255.252

  ppp multilink

  no shutdown

  cross-connect 1 t1 0/1 1 ppp 1

  cross-connect 2 t1 0/2 1 ppp 1

  cross-connect 3 t1 0/3 1 ppp 1

  cross-connect 4 t1 0/4 1 ppp 1

!

!

!

!

timing-source t1 0/1

timing-source t1 0/3 secondary

timing-source t1 0/4 secondary

timing-source t1 0/2 secondary

!

[nooksr]

I have tried that as well. All of the clock sources are matching up. Still receiving the same error as before.

Robert Nooks

Provisioning Technician

National Service Delivery Implementations Team

robert.nooks@centurylink.com

(614) 973-6383 (IP phone)

Office Hours: Mo - Fr 0600 - 1600 Eastern