I have a two trunks a SIP and one for FXO. I prefer the FXO. I have a SIP phone registered to the Adtran, but I can't get it to make calls out of the FXO port.
When I dial 9 typically I get a secondary dial tone and then I can begin dialing. I can't get this to happen, even though I have it allowed on the trunk group:
voice trunk T09 type analog supervision loop-start
description "POTS"
caller-id
trunk-number 300
connect fxo 0/0
no nls
no echo-cancellation
rtp delay-mode adaptive
voice grouped-trunk T01
description "SIP TRUNK TO METASWITCH"
trunk T01
accept $ cost 10
!
!
voice grouped-trunk ANALOG
description "POTS DESK JACK"
trunk T09
accept 1-NXX-XXX-XXXX cost 0
accept NXX-XXXX cost 0
accept 911 cost 0
accept 9 cost 0
accept *XX cost 0
voice trunk T01 type sip
description "Metaswitch"
sip-server primary xxxx.xxxx.xxxx.xxxx
authentication username "xxx-xxx-xxxx" password foo
sip-keep-alive options 30
codec-group p
voice user 300
connect sip
sip-identity xxx-xxx-xxxxT01
sip-authentication password "xxxxxxxxxx" password foo
codec-group p
