cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
rlg192320
New Contributor

PRI D Channel

Jump to solution

Hi,

I was wondering if anyone could tell me how to choose a specific D channel rather than using channel 24. I have a customer that wants the D channel to reside on channel 1 instead of 24. Has anyone else ever ran into this?

Thanks,

Robert G

0 Kudos
1 Solution

Accepted Solutions
Anonymous
Not applicable

Re: PRI D Channel

Jump to solution

Hello Robert,

The D-channel has to be set for channel 24 on the Total Access 900(e) units. You can setup a full T1 or a fractional T1, but the D-channel must be channel 24.  Unfortunately there is no way around this.  This document covers the PRI configuration in AOS:

https://supportforums.adtran.com/docs/DOC-1856


Page 3 has a note that states that channel 24 is dedicated for PRI signaling.  Let me know if you have any questions.

Regards,

Geoff

View solution in original post

0 Kudos
2 Replies
Anonymous
Not applicable

Re: PRI D Channel

Jump to solution

Hello Robert,

The D-channel has to be set for channel 24 on the Total Access 900(e) units. You can setup a full T1 or a fractional T1, but the D-channel must be channel 24.  Unfortunately there is no way around this.  This document covers the PRI configuration in AOS:

https://supportforums.adtran.com/docs/DOC-1856


Page 3 has a note that states that channel 24 is dedicated for PRI signaling.  Let me know if you have any questions.

Regards,

Geoff

0 Kudos
Anonymous
Not applicable

Re: PRI D Channel

Jump to solution

Hello Robert,

I went ahead and flagged this post as "Correct."  If you still need assistance, we would be more than happy to continue working with you on this - just let us know in a reply.

Thanks,

Geoff