Adtran
Help
The Adtran community holiday season is starting next week! The holiday period will span from December 21, 2024 to January 6, 2025. During this time, responses to feedback form submissions may be delayed. If you are encountering product issues, you can reach out to Adtran support at any time.
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Show  only  | Search instead for 
Did you mean: 
jamese
New Contributor
‎11-12-2019 09:17 AM

I am using a 908e and all outbound calls get a regular busy. Inbound calls work fine. No CPN should take care of the caller ID outgoing, but it looks like the dialed number is unknown? Anyone know where to program. Any help is appreciated. Debug is below

19:24:07.863 ISDN.L2_FMT PRI 1  R Sapi:00 C/R:R Tei:00 INFO Ns:81  Nr:70  P:0

19:24:07.863 ISDN.L2_FMT PRI 1    Prot:08 CRL:2  CRV:0008

19:24:07.863 ISDN.L2_FMT PRI 1    M - 05 SETUP

19:24:07.863 ISDN.L2_FMT PRI 1     IE - 04 BEARER CAPABILITY   Len=3

19:24:07.863 ISDN.L2_FMT PRI 1          80 Xfer Cap.:SPEECH

19:24:07.863 ISDN.L2_FMT PRI 1          90 Xfer Rate:64k

19:24:07.863 ISDN.L2_FMT PRI 1          A2 Layer 1:G.711 U-Law

19:24:07.863 ISDN.L2_FMT PRI 1     IE - 18 CHANNEL ID          Len=3

19:24:07.864 ISDN.L2_FMT PRI 1          A9 Primary Rate

19:24:07.864 ISDN.L2_FMT PRI 1             Intfc ID:IMPLICIT

19:24:07.864 ISDN.L2_FMT PRI 1             Pref/Excl:EXCLUSIVE

19:24:07.864 ISDN.L2_FMT PRI 1             D-Chan Indicated:NO

19:24:07.864 ISDN.L2_FMT PRI 1             Chan. Sel:FOLLOWS

19:24:07.864 ISDN.L2_FMT PRI 1          83 Numb/Map:NUMBER

19:24:07.864 ISDN.L2_FMT PRI 1          97 Channel:23

19:24:07.864 ISDN.L2_FMT PRI 1     IE - 70 CALLED PARTY #      Len=1

19:24:07.864 ISDN.L2_FMT PRI 1          80 Numb. Type:UNKNOWN

19:24:07.864 ISDN.L2_FMT PRI 1             Numb. Plan:UNKNOWN

19:24:07.865 ISDN.L2_FMT PRI 1             Ph.#

19:24:07.865 ISDN.L2_FMT PRI 1 ==============================================

19:24:07.865 ISDN.L2_FMT PRI 1  T Sapi:00 C/R:C Tei:00 INFO Ns:70  Nr:82  P:0

19:24:07.866 ISDN.L2_FMT PRI 1    Prot:08  CRL:2 CRV:8008

19:24:07.866 ISDN.L2_FMT PRI 1    M - 02 CALL_PROC

19:24:07.866 ISDN.L2_FMT PRI 1     IE - 18 CHANNEL ID          Len=3

19:24:07.866 ISDN.L2_FMT PRI 1          A9 Primary Rate

19:24:07.866 ISDN.L2_FMT PRI 1             Intfc ID:IMPLICIT

19:24:07.866 ISDN.L2_FMT PRI 1             Pref/Excl:EXCLUSIVE

19:24:07.866 ISDN.L2_FMT PRI 1             D-Chan Indicated:NO

19:24:07.866 ISDN.L2_FMT PRI 1             Chan. Sel:FOLLOWS

19:24:07.866 ISDN.L2_FMT PRI 1          83 Numb/Map:NUMBER

19:24:07.867 ISDN.L2_FMT PRI 1          97 Channel:23

19:24:07.867 VOICE.SUMMARY Could not route call to .

19:24:07.868 VOICE.SUMMARY WARNING voice trunk accept templates

19:24:07.869 ISDN.L2_FMT PRI 1 ==============================================

19:24:07.869 ISDN.L2_FMT PRI 1  T Sapi:00 C/R:C Tei:00 INFO Ns:71  Nr:82  P:0

19:24:07.869 ISDN.L2_FMT PRI 1    Prot:08  CRL:2 CRV:8008

19:24:07.869 ISDN.L2_FMT PRI 1    M - 45 DISCONNECT

19:24:07.869 ISDN.L2_FMT PRI 1     IE - 08 CAUSE               Len=2

19:24:07.869 ISDN.L2_FMT PRI 1          82 Location:LN

19:24:07.869 ISDN.L2_FMT PRI 1          81 Cause:1 (UNASSIGNED_NUMBER)

19:24:07.915 ISDN.L2_FMT PRI 1 ==============================================

19:24:07.916 ISDN.L2_FMT PRI 1  R Sapi:00 C/R:R Tei:00 INFO Ns:82  Nr:72 P:0

19:24:07.916 ISDN.L2_FMT PRI 1    Prot:08  CRL:2 CRV:0008

0 Kudos
Reply
2 Replies
Anonymous
Not applicable
‎11-12-2019 10:21 AM

Re: I am using a 908e and all outbound calls get a regular busy. Inbound calls work fine. No CPN should take care of the caller ID outgoing, but it looks like the dialed number is unknown? Anyone know where to program. Any help is appreciated. Debug is be

Please post your config

0 Kudos
Accept as Solution Reply
Anonymous
Not applicable
‎11-12-2019 03:16 PM

Re: I am using a 908e and all outbound calls get a regular busy. Inbound calls work fine. No CPN should take care of the caller ID outgoing, but it looks like the dialed number is unknown? Anyone know where to program. Any help is appreciated. Debug is be

According to this debug, the ADTRAN is receiving the SETUP message with no CALLED PARTY #.  This is coming to the ADTRAN on the PRI - it is a received message.

The "Numb. Type:"  and "Numb. Plan:" being "UNKNOWN" is not a problem. It's the " Ph.#" being empty that's the problem.

There isn't a configuration option in the ADTRAN to provide the CALLED PARTY # on a received ISDN call.

Hope this helps,

Patrick

0 Kudos
Accept as Solution Reply