We use a dialer to make customer calls. It can dial up to 100 calls concurrently via SIP. We have a new 908e that we were considering using as an SBC to secure a number of SIP trunks and and a couple PRI. The call volume through the PRI is low, probably another 20 calls. Does the 908e have the horsepower to handle that kind of volume? The published specs sure look like it can. Can someone confirm or deny?
Michael
If you look at the feature matrix it will give you more detailed specs:
AOS Feature Matrix - Product Feature Matrix
The unit is spec'd at 100 SBC calls through the unit. I would not combine 100 simultaneous SBC calls plus 20 PRI calls through the box. I would not sell a unit where it is initially maxed out.
The box you need to use in that solution is the NetVanta 6250. It can do up to 200 calls with up to 4 PRIs.
The other option is to put the NetVanta 3140 in front (300 SBC calls) and then daisy chain via eth to the 908e for the PRI connection.
Hope that helps.
-Mark
If you look at the feature matrix it will give you more detailed specs:
AOS Feature Matrix - Product Feature Matrix
The unit is spec'd at 100 SBC calls through the unit. I would not combine 100 simultaneous SBC calls plus 20 PRI calls through the box. I would not sell a unit where it is initially maxed out.
The box you need to use in that solution is the NetVanta 6250. It can do up to 200 calls with up to 4 PRIs.
The other option is to put the NetVanta 3140 in front (300 SBC calls) and then daisy chain via eth to the 908e for the PRI connection.
Hope that helps.
-Mark