cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Anonymous
Not applicable

Change Frequency of "PRI 3 D channel is DOWN" event message

Jump to solution

I am running AOS R11.12.0.E and when my PRI is down, every 5 seconds their is an informational event showing that the PRI is down. When troubleshooting a configuration issue to fix the PRI, a status message every 5 seconds is ANNOYING. I understand I could do "no event" or shut the interface but I don't want to do either of those. Is their a way to change the frequency of this informational event? Ex: every 30 seconds instead of 5

2016.05.12 09:27:51 ISDN.EP     PRI  3  D channel is DOWN

2016.05.12 09:27:56 ISDN.EP     PRI  3  D channel is DOWN

2016.05.12 09:28:01 ISDN.EP     PRI  3  D channel is DOWN

2016.05.12 09:28:06 ISDN.EP     PRI  3  D channel is DOWN

2016.05.12 09:28:11 ISDN.EP     PRI  3  D channel is DOWN

2016.05.12 09:28:16 ISDN.EP     PRI  3  D channel is DOWN

2016.05.12 09:28:21 ISDN.EP     PRI  3  D channel is DOWN

2016.05.12 09:28:26 ISDN.EP     PRI  3  D channel is DOWN

2016.05.12 09:28:31 ISDN.EP     PRI  3  D channel is DOWN

2016.05.12 09:28:36 ISDN.EP     PRI  3  D channel is DOWN

2016.05.12 09:28:41 ISDN.EP     PRI  3  D channel is DOWN

Labels (2)
Tags (2)
0 Kudos
1 Solution

Accepted Solutions
Anonymous
Not applicable

Re: Change Frequency of "PRI 3 D channel is DOWN" event message

Jump to solution

George, normally that message is a one-time event, so for it to be showing up like that, it likely means your D channel is flapping. In any case, there is no way to alter the frequency of the message other than entering "no event". Thanks

Jay

View solution in original post

0 Kudos
3 Replies
Anonymous
Not applicable

Re: Change Frequency of "PRI 3 D channel is DOWN" event message

Jump to solution

George, normally that message is a one-time event, so for it to be showing up like that, it likely means your D channel is flapping. In any case, there is no way to alter the frequency of the message other than entering "no event". Thanks

Jay

0 Kudos
jayh
Honored Contributor
Honored Contributor

Re: Change Frequency of "PRI 3 D channel is DOWN" event message

Jump to solution

Something is unhappy with the PRI or underlying T1.

  • Timing slips? Exactly one side of the T1 should source clock.
  • ISDN switch type mismatch.
  • Both sides role user or both sides role network.
  • Framing/coding mismatch. PRI wants ESF/B8ZS on both sides.
Anonymous
Not applicable

Re: Change Frequency of "PRI 3 D channel is DOWN" event message

Jump to solution

Yep, I understand how PRI clocking, framing, coding...etc. work. I'm lab testing this device and I'm just thinking when we're turning up a new customer and trying to diagnose why the D-channel won't come up, that message is going to be obnoxious. I'll just have to use "no event" since there doesn't seem to be any other way.

Thanks for the input!