Call forwarding / Remote call forwarding on 908e

[manojkumar305]

If one of the users configured in the 908e as Analog FXS station - how do they call forward to another number? What's the procedure?

[Anonymous · Accepted solution]

manojkumar305,

Thanks for posting.  With the exception of our linear hunt group configuration, the Total Access unit should not be handling any call forwarding itself.  This should either be handled in the customer phone system (PBX) or in the SIP Server.  In the case of the SIP server, the customer may need to dial a SPRE code to set that up.  Below is an example of a configuration that might be needed on the Adtran unit in order for that SPRE code to be sent out over the SIP trunk.  Your SIP server may require different or additional SPRE code templates.

voice spre 1 *33NXXNXXXXXX

Thanks again for posting and welcome to our Support Community!

David

[Anonymous]

manojkumar305,

I went ahead and flagged this post as "Assumed Answered".  If the response on this thread assisted you, please mark it as Correct or Helpful as the case may be with the applicable buttons.  This will make it visible and help other members of the community find solutions more easily.  If you still need assistance, I would be more than happy to continue working with you on this - just let me know in a reply.

Thanks!

David