Adtran
Help
The Adtran community holiday season is starting next week! The holiday period will span from December 21, 2024 to January 6, 2025. During this time, responses to feedback form submissions may be delayed. If you are encountering product issues, you can reach out to Adtran support at any time.
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Show  only  | Search instead for 
Did you mean: 
jmiller10
New Contributor
‎02-26-2020 08:06 AM

Adtran 908e Configuration Issues

Hello,

I am having trouble configuring my adtran router.

Commands like domain-proxy and name-server are coming back as unrecognized commands.

The current version I have is A4. 11.00.E.

Thanks in advance.

0 Kudos
Reply
1 Reply
jayh
Honored Contributor
Honored Contributor
‎02-28-2020 12:08 AM

Re: Adtran 908e Configuration Issues

Make sure that you are in the correct mode. Enabled and in configuration mode. The prompt should look like:

hostname(config)#

Also, a while back IPv6 was added to the configuration of most AOS versions. This slightly changed the syntax. Many layer 3 commands require "ip" before the command, or "ipv6" if you're configuring ipv6 protocol.

Also, there are some commands that are specific to a section of the configuration and others that are global. If you're configuring an interface, global commands won't be recognized.

You can see the available commands by typing a "?" at any point.

0 Kudos
Accept as Solution Reply