cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
smthomas66
New Contributor

2 PRI setup with no outbound audio if both PRI's are up. Two way audio when one or the other is down

Customer has one way audio outbound only when both PRI'2 are no shut. If you shutdown one or the other the audio is fine

Current system image file is "T900E3A-R11-10-4-E.biz"

Platform: Total Access 900e (3rd Gen), part number 4243924L8

interface t1 0/3
  description PRI T1
  tdm-group 1 timeslots 1-16,24 speed 64
  no shutdown
!
interface t1 0/4
  description PRI T1
  tdm-group 1 timeslots 1-16,24 speed 64
  no shutdown
!
!
interface pri 1
  isdn name-delivery setup
  connect t1 0/3 tdm-group 1
  no shutdown
!
interface pri 2
  isdn name-delivery setup
  connect t1 0/4 tdm-group 1
  no shutdown

 

voice trunk T02 type isdn
  description "PRI CONNECTION"
  resource-selection circular descending
  busy-out monitor track WANTRACK
  connect isdn-group 1
  no early-cut-through
  modem-passthrough
  rtp delay-mode adaptive
  codec-list 729-711
!
voice trunk T03 type isdn
  description "PRI CONNECTION"
  resource-selection linear ascending
  busy-out monitor track WANTRACK
  connect isdn-group 2
  modem-passthrough
  rtp delay-mode adaptive
  codec-list 729-711

voice grouped-trunk "SIP TRUNK GROUP FAX"
  trunk T30
  accept $ cost 0
  permit list FAXUsers
  !deny all other trunks
  !deny all other ani
!
!
voice grouped-trunk "SIP TRUNK GROUP"
  trunk T25
  accept $ cost 100
  deny list FAXUsers
  permit list AllUsers
  !deny all other trunks
  !deny all other ani
!
!
voice grouped-trunk PRI
  trunk T02
  trunk T03
  accept $ cost 0
!
!
voice grouped-trunk "SIP TRUNK GROUP FWD"
  trunk T35
  accept $ cost 0
  deny list FAXUsers
  permit list AllUsers
  !deny all other trunks
  !deny all other ani

0 Kudos