UC not tagging DSCP

[Anonymous]

I checked and it is enabled.

On a separate note:

I have a UC/BCS server at the HQ site and remote users across an mpls WAN topology.  The UC server doesn’t appear to mark any DSCP so I need to use an access list and input qos policy on the mpls router.  Is there any document that lists the udp/rtp ports that will be used?  I didn’t want to just prioritize all packets from the UC server but that is an option.

Thanks

Brian

[Anonymous]

Brian,

I branched this to a new discussion.  You are correct that UC does not tag DSCP.  Unfortunately we do not have a document that lists specific port numbers.  You can prioritize all UDP traffic coming from the server.  If you want to get more specific you can include the destination voice subnets.

Thanks,
Matt

[Anonymous]

Sounds like a plan.

Message was edited by: matt - removed personal contact information

[Anonymous · Accepted solution]

Brian - can you return to this post to flag the "Correct Answer"?  That will help other community members know that a solution exists for this thread.

Thanks,
Matt