Hello Guys,
How you doing!?, I'm writing you because I'm working with my NV7100 and I want to use the option of VM to E-mail, I set up the following commands for do this:
logging email on
logging email receiver-ip mail.XXXX.com auth-username nv7100@XXXX.com auth-password XXXXXXX
logging email sender NV7100
But when someone leaves a message in my extension (2173) I didn't receive the message on my e-mail inbox.
The server that I'm using for send e-mails is fully operational.
I'm attaching my NV7100 current config.
Would you help me!?
Thanks a bunch!,
It looks like notify email primary is missing. Try pasting this configuration script in.
!
configure terminal
voice user 2173
voicemail notify schedule Sunday 12:00 am
notify email primary
end
write memory
!
Thanks,
Matt
dcorrea,
Thank you for this question. Here is a sample configuration that can be used with a Yahoo mail account:
!
ip name-server <primary DNS server> <secondary DNS server>
logging email receiver-ip smtp.yahoo.com port 587 auth-username <yahoo-account>@yahoo.com auth-password <yahoo password>
logging email sender <yahoo-account>@yahoo.com
!
voice user <extension>
email <e-mail address>
voicemail notify email attach-message pcm
voicemail notify schedule Sunday 12:00 am
notify email primary
!
You would just need to substitute the Yahoo mail information for your specific mail server.
The SMTP client in AOS supports only the following authentication methods:
If your mail server does not support any of these, than you need to use a different SMTP server that supports one of the authentication methods listed above.
In looking at your configuration it appears the logging email sender command only has "7100" entered and not a valid e-mail address. Also, after the voicemail notify schedule Sunday 12:00 am command you need to enter notify email primary in the voice user configuration . Try changing those and see if it fixes the issue.
If the configuration is correct but it still is not working you would need to capture the output from a debug system to capture the SMTP transactions between the 7100 and the mail server.
I hope this helps. Please feel free to reply with any follow-up questions.
Thanks,
Matt
Dear Matt,
I performed the suggestions that you sent me but unfortunately my VM-To-Email still not working.
On the output from the debug I'm seeing this:
NV7100#SMTP Not enough info to send.
SMTP Not enough info to send.
Any other suggestion!?
Thanks,
Do you have DNS servers defined in your configuration with the ip name-server command? If you reference the server by host name instead of IP with the logging email receiver-ip command you need DNS to resolve the IP of the mail server. If this is the issue you would also have problems trying to ping the mail server by host name from the command line.
Thanks,
Matt
Dear Matt,
Thank you for keep following this issue, let me give you more feedback:
I set the ip name-server on the Adtran NV7100 and in fact the resolution for the IP of my mail server appears on the DNS Table Entries of the unit. Then for the logging email receiver-ip i was using the hostname, now i set directly the IP. BUt I still seeing this message on the debug system:
SMTP Not enough info to send.
SMTP Not enough info to send.
What you think!?
Thanks again,
That message can appear when email logging is turned on. Do these messages correspond to when you leave a voicemail message? I accidentally implied with the sample configuration above that e-mail logging is needed for this feature to work. I removed that line out of the sample configuration. If you enter the command no logging email do the messages go away? You have to leave a voicemail message for an extension configured as noted above while the debug system is running to catch what the issue is.
Thanks,
Matt
Dear Matt,
I turned off the logging email, and now I don't see any related messages to SMTP on the debug.
I review again my settings for the voicemail and everything seems to be OK!. If you have more suggestions I will appreciate them.
Thanks a million!,
It sounds like notify email primary is not set on the voice user. Can you paste in the configuration for the voice user that you are attempting to leave a message for?
Thanks,
Matt
Dear Matt,
Here you go:
voice user 2173
connect sip
cos "normal_users"
first-name "David"
last-name "Correa"
findme-followme enhanced
num-rings 2
coverage findme-followme
codec-group G711
no directory-include
email user@XXXX.com
voicemail auth-mode password
voicemail greeting default
voicemail cos normal_voicemail
voicemail notify email attach-message pcm
script "script-3"
action 1 internal 2147 no-press-to-accept ring-time 2
action 2 vm
action 3 refer 0
contact-group 3
name "Everyone"
description "All other contacts"
implicitly-include all
ringback
no courtesy-greeting
presence available script "script-3"
voicemail notify schedule Sunday 12:00 am
Thanks again,
It looks like notify email primary is missing. Try pasting this configuration script in.
!
configure terminal
voice user 2173
voicemail notify schedule Sunday 12:00 am
notify email primary
end
write memory
!
Thanks,
Matt
Dear Matt,
Thanks a lot for all your help, you were right, now my VM-to-Email functionality is working properly.
Have a nice day.
dcorrea - Great! I'm glad that did the trick.
Thanks,
Matt