Hello all!!!
I need help with this configuration, please. FXO 0/1 works. I'm trying to get one extension to make use of an another line connected to FXO 0/2; however, when I "configure it" following the Adtran guides, if I do a debug, I get the following when I dial it:
13:07:35.706 FXO.0/2 FxoPortStateOnhookReverse -> FxoPortStateOnhookNormal
13:07:37.180 FXO.0/2 Battery Reverse Debounce:::::::::::::::++++t*::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::Ì
13:07:37.224 FXO.0/2 FxoPortStateOnhookNormal -> FxoPortStateOnhookReverse
13:07:38.292 FXO.0/2 Battery Reverse Debounce:;;;;;;;;;;;;;;;;;----f*;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;Ì
13:07:38.347 FXO.0/2 FxoPortStateOnhookReverse -> FxoPortStateOnhookNormal
13:07:40.372 FXO.0/2 Battery Reverse Debounce:-:+-::::::++++t*::++--:+-::++--:+-::++--:++--++--+++--++---++--++--:++--:+-::++--:+-::++--++--:++-Ì
I get ring back on my phone but the destination phone does not ring. The messages should say Ringing... not Battery Reverse Debounce
I appreciate any help you guys can provide
SOLVED! This was a dirty port problem. Dusted it and now it works.
Thanks for all the help
gerardo wrote:
Hello all!!!
I need help with this configuration, please. FXO 0/1 works. I'm trying to get one extension to make use of an another line connected to FXO 0/2; however, when I "configure it" following the Adtran guides, if I do a debug, I get the following when I dial it:
13:07:35.706 FXO.0/2 FxoPortStateOnhookReverse -> FxoPortStateOnhookNormal
13:07:37.180 FXO.0/2 Battery Reverse Debounce:::::::::::::::++++t*::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::Ì
13:07:37.224 FXO.0/2 FxoPortStateOnhookNormal -> FxoPortStateOnhookReverse
13:07:38.292 FXO.0/2 Battery Reverse Debounce:;;;;;;;;;;;;;;;;;----f*;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;;Ì
13:07:38.347 FXO.0/2 FxoPortStateOnhookReverse -> FxoPortStateOnhookNormal
13:07:40.372 FXO.0/2 Battery Reverse Debounce:-:+-::::::++++t*::++--:+-::++--:+-::++--:++--++--+++--++---++--++--:++--:+-::++--:+-::++--++--:++-Ì
I get ring back on my phone but the destination phone does not ring. The messages should say Ringing... not Battery Reverse Debounce
I appreciate any help you guys can provide
What happens if you swap the lines in FXO 0/1 and 0/2? Does the problem follow the port or the line?
Thank you for replying James. I have not been able to try it. I will see if I can swap them tomorrow, for testing
The problem does not follow the line when switched to FXO 0/1
gerardo wrote:
The problem does not follow the line when switched to FXO 0/1
So the problem stays with FXO 0/2? Please reply with the full configuration of the 7100.
SOLVED! This was a dirty port problem. Dusted it and now it works.
Thanks for all the help
Thank you so much for the update!