I'm wondering if this is normal and if so, why it is...
My partial config:
probe ComcastProbe-1 icmp-echo
destination 8.8.8.8
source-address x.x.x.x
period 5
tolerance consecutive fail 5 pass 3
no shutdown
!
probe ComcastProbe-2 icmp-echo
destination 8.8.4.4
source-address x.x.x.x
period 5
tolerance consecutive fail 5 pass 3
no shutdown
!
probe ComcastProbe-3 icmp-echo
destination 4.2.2.1
source-address x.x.x.x
period 5
tolerance consecutive fail 5 pass 3
no shutdown
!
track "WAN_TEST"
log-changes
snmp trap state-change
test list or
if probe ComcastProbe-1
if probe ComcastProbe-2
if probe ComcastProbe-3
no shutdown
!
...end
Why does the Comcast-3 probe indicate that it is tracked by "Nothing"? Is this normal?
FP3448(config)#do sh probe
Probe ComcastProbe-1:
Current State: PASS Admin. Status: UP
Type: ICMP Echo Period: 5 sec Timeout: 1500 msec
Source: x.x.x.x Destination: 8.8.8.8
Data size: 0
Tracked by: WAN_TEST
Tests Run: 46872 Failed: 2
Tolerance: 0 consecutive failures currently, 5 needed to FAIL
Time in current state: 2 days, 17 hours, 25 minutes, 34 seconds
Probe ComcastProbe-2:
Current State: PASS Admin. Status: UP
Type: ICMP Echo Period: 5 sec Timeout: 1500 msec
Source: x.x.x.x Destination: 8.8.4.4
Data size: 0
Tracked by: WAN_TEST
Tests Run: 46872 Failed: 5
Tolerance: 0 consecutive failures currently, 5 needed to FAIL
Time in current state: 2 days, 17 hours, 25 minutes, 33 seconds
Probe ComcastProbe-3:
Current State: PASS Admin. Status: UP
Type: ICMP Echo Period: 5 sec Timeout: 1500 msec
Source: x.x.x.x Destination: 4.2.2.1
Data size: 0
Tracked by: Nothing
Tests Run: 46873 Failed: 1
Tolerance: 0 consecutive failures currently, 5 needed to FAIL
Time in current state: 2 days, 17 hours, 25 minutes, 32 seconds
Thanks,
Dan
This appears to be a display issue with the show probe command when there are more than two entries in the "test list" probe configuration. It should not affect functionality at all. Thank you for bringing this to our attention. Let me know if you have any additional questions.
Levi
Levi,
The 3448 is running 18.03.01.00.E
FP3448#sh track
Track WAN_TEST:
Current State: PASS (Admin: UP)
Testing:
probe ComcastProbe-1 (PASS)
OR probe ComcastProbe-2 (PASS)
OR probe ComcastProbe-3 (PASS)
Dampening Interval: 1 seconds
Time in current state: 4 days, 20 hours, 53 minutes, 44 seconds
Track State Changes: 0
Tracking:
ip route 0.0.0.0 0.0.0.0 X.X.160.54
FP3448#
Shows all three!
Dan
I had the opportunity to check 3 other sites which are also running probe lists and they also had the display issue. They all seem to be functioning correctly.
Dan