Message Waiting Issue

[Anonymous]

I'm having an issue with MWT not working on a 2500 set and a Astra M9316 set being served from an Adtran TA 900e. The MWI light does not light when messages are left.  Has anyone else come across this issue?'

Thanks

[jayh]

Set the mwi to "neon" for the 2500 set, this should fix the Aastra as well.

conf t

int fxs 0/1 ! (or whatever analog port is appropriate)

mwi neon

[Ctrl-Z]

wr mem

[rdeed]

...thought to pik your brain....   I'm trying to come up with solutions (band-aids) to migrate existing M13-T1s and deliver to customers. customer currently has over 20 T1s at location. End equipment is Ethernet based. I was thinking to have all T1s at CO combined via M13, then deliver to customer via one 100M pipe (VLAN). Is this possible?

[jayh]

Wow, talk about hijacking a thread! What does this have to do with message waiting? Probably best to start a new discussion.

What are the T1s being used for? If PRI or TDM-based services, the most logical would be to use a T3 and muxes at both ends to deliver up to 28 T1s. Otherwise, go straight Ethernet end-to-end. Really need more info as to the application to make a good decision.

[rdeed]

Sorry about the hijack… I’m trying to find a newer T1-mux solution, and avoiding mux at both ends. TDM is at one end, and I’m trying to deliver to near end via ethernet.

I will start a new discussion for all to read and share. Thank You.

Richard

[Anonymous]

guys,

     Not sure where this new thread is... but try looking at using Pseudowire...  for that DS1 transport problem.  Adtran MX4xx or bigger stuff is available through RAD