How to convert BGP configuration to newer AOS release

[chi]

I am upgrading a NetVanta 3430 to AOS release R10.1.0 later. How should I make the corresponding change for the below BGP configuration?

!

router bgp 65000

  no auto-summary

  no synchronization

  bgp router-id 192.168.1.1

  network 192.168.1.0 mask 255.255.255.0

  neighbor 10.100.100.1

    no default-originate

    soft-reconfiguration inbound

    remote-as 65001

!

[Anonymous · Accepted solution]

chi‌:

Thank you for asking this question in the support community forum.  When upgrading AOS firmware from a version prior to 18.03.00/R10.1.0, to a version of AOS 18.03.00/R10.1.0 or later, the newer AOS version will auto-change the configuration to adhere to the new BGP commands; therefore, you do not need to change any commands manually.  Please, note, the opposite does not work (i.e. if you downgrade AOS from the current AOS BGP commands, to a version prior to 18.03.00/R10.1.0, the BGP commands will not be compatible).

Here is the Configuring BGP in AOS Releases Prior to 18.03.00/R10.1.0 guide and here is the Configuring BGP in AOS 18.03/R10.1.0 or later guide.  I hope that makes sense, but please do not hesitate to reply to this post with any additional information or questions.  I will be happy to help in any way I can.

Levi