Here is some of my configuration:
interface vlan 1
ip address 10.10.10.1 255.255.255.0
ip access-policy Private
ip route-cache express
no shutdown
!
interface vlan 2
description Vlan 2
ip address xxx.xxx.xxx.xxx
ip mtu 1500
ip access-policy Public
no rtp quality-monitoring
no awcp
no ip route-cache express
no shutdown
!
!
!
!
!
!
ip access-list standard wizard-ics
remark Internet Connection Sharing
permit any log
!
!
ip access-list extended ALLOWED_SITES
permit ip any xx.xx.xx.xx
deny ip any any
!
ip access-list extended self
remark Traffic to NetVanta
permit ip any any log
!
ip access-list extended web-acl-5
remark Allowed Websites
!
We need more of the configuration, specifically the Public and Private ip policy-class statements.
Here you go. I am still unable to get this to work properly. ip policy-class Private allow list self self nat source list ALLOWED_SITES interface vlan 2 overload ! ip policy-class Public allow list wizard-remote-access self ! !
As this could be a few different issues, it would be best for you to post your complete configuration (redacted) or open a Tech Support Ticket so that we can assist you. You can use the link below to open a support ticket.
http://portal.adtran.com/web/page/portal/Adtran/wp_support_openasupportcase
Regards,
Donna