The Adtran community holiday season is starting next week! The holiday period will span from December 21, 2024 to January 6, 2025. During this time, responses to feedback form submissions may be delayed. If you are encountering product issues, you can reach out to Adtran support at any time.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
srk2016
New Contributor

Having a issue with a Ip Access List that is supposed to only allow certain sites and deny everything else.. With list enforced , all traffic is blocked. I have ACL tied with correct security zone/policy. Just trying to find out why it is not working .

Here is some of my configuration:

interface vlan 1

  ip address  10.10.10.1  255.255.255.0

  ip access-policy Private

  ip route-cache express

  no shutdown

!

interface vlan 2

  description Vlan 2

  ip address  xxx.xxx.xxx.xxx

  ip mtu 1500

  ip access-policy Public

  no rtp quality-monitoring

  no awcp

  no ip route-cache express

  no shutdown

!

!

!

!

!

!

ip access-list standard wizard-ics

  remark Internet Connection Sharing

  permit any log

!

!

ip access-list extended ALLOWED_SITES

  permit ip any  xx.xx.xx.xx

  

  deny   ip any  any   

!

ip access-list extended self

  remark Traffic to NetVanta

  permit ip any  any     log

!

ip access-list extended web-acl-5

  remark Allowed Websites

!

0 Kudos
3 Replies
jayh
Honored Contributor
Honored Contributor

Re: Having a issue with a Ip Access List that is supposed to only allow certain sites and deny everything else.. With list enforced , all traffic is blocked. I have ACL tied with correct security zone/policy. Just trying to find out why it is not working

We need more of the configuration, specifically the Public and Private ip policy-class statements.

srk2016
New Contributor

Re: Having a issue with a Ip Access List that is supposed to only allow certain sites and deny everything else.. With list enforced , all traffic is blocked. I have ACL tied with correct security zone/policy. Just trying to find out why it is not working

Here you go. I am still unable to get this to work properly. ip policy-class Private   allow list self self   nat source list ALLOWED_SITES interface vlan 2 overload ! ip policy-class Public   allow list wizard-remote-access self ! !

Anonymous
Not applicable

Re: Having a issue with a Ip Access List that is supposed to only allow certain sites and deny everything else.. With list enforced , all traffic is blocked. I have ACL tied with correct security zone/policy. Just trying to find out why it is not working

As this could be a few different issues, it would be best for you to post your complete configuration (redacted) or open a Tech Support Ticket so that we can assist you. You can use the link below to open a support ticket.

http://portal.adtran.com/web/page/portal/Adtran/wp_support_openasupportcase



Regards,

Donna