The Adtran community holiday season is starting next week! The holiday period will span from December 21, 2024 to January 6, 2025. During this time, responses to feedback form submissions may be delayed. If you are encountering product issues, you can reach out to Adtran support at any time.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 

Re: Configuration of T1 on Netvanta 3448

Jump to solution

Changing the IP address on the Adtran for Ethernet 0/1 to 11.205.205.5/31 still doesn't allow ping. I believe the Adtran engineer had already tried bridging the Adtran but still no ping. We may just look into redesigning the way we connect client side equipment since this seems to not want to work.

jayh
Honored Contributor
Honored Contributor

Re: Configuration of T1 on Netvanta 3448

Jump to solution

You can't route the same subnet on both sides of the link. Assign a different subnet to the ethernet of the Adtran than you have on the ethernet of the upstream, not just a different IP in the same subnet.

Re: Configuration of T1 on Netvanta 3448

Jump to solution

I have now been able to reproduce the issue with our once working router. I will try a few changes on the Adtran and hopefully have better results. Will update here once complete.

Re: Configuration of T1 on Netvanta 3448

Jump to solution

I was able to reproduce the issue on our Tiara router (bundle up but no routing). The config I yanked out from the Tiara is below. I don’t know of a way to add the VLAN ID to the 3200/3448 Adtran. On the 3200, when I assign the Ethernet port as a VLAN trunk it disables the ability to assign a static IP. The TEST is the bundle that is configured on our DS3 as well as the client side Tiara. It seems that without this VLAN ID/default route, the IP routing fails. Is there a way to replicate this configuration on AOS?

vlanfwd

  add  vlanid 41 TEST

  management

    vlanid 41

    default_route 11.205.205.200 TEST

    exit management

  exit vlanfwd

Re: Configuration of T1 on Netvanta 3448

Jump to solution

So I configured the interface eth 0/1 with 802.1q encapsulation, then created a sub interface eth 0/1.1. I then assigned the vlanid 41 to be the native vlanID for sub interface eth0/1.1. I then configured the PPP 1 interface with ip unnumbered eth0/1.1. The PPP 1 interface picks up the statically assigned IP from sub interface eth0/1.1 but still no routing. I even tried assigning a new IP 11.205.208.5/24 but still no success.

Re: Configuration of T1 on Netvanta 3448

Jump to solution

Here is the Bridging config I used. Still no ping.

!

hostname "Router"

no enable password

!

clock timezone GMT-Dublin

!

ip subnet-zero

ip classless

ip routing

!

auto-config

!

event-history on

no logging forwarding

no logging email

!

no service password-encryption

!

username "admin" password "password"

!

!

no ip firewall alg msn

no ip firewall alg mszone

no ip firewall alg h323

!

!

!

!

!

!

!

no dot11ap access-point-control

bridge irb

!

!

bridge 1 protocol ieee

!

!

!

!

!

!

!

!

!

!

!

!

!

interface eth 0/1

  bridge-group 1

  bridge-group 1 vlan-transparent

  no ip address

  no shutdown

!

!

!

!

interface t1 1/1

  tdm-group 1 timeslots 1-24 speed 64

  no shutdown

!

interface ppp 1

  bridge-group 1

  bridge-group 1 vlan-transparent

  no ip address

  ppp bcp tagged-frame

  mtu 1524

  no shutdown

  cross-connect 1 t1 1/1 1 ppp 1

!

!

interface bvi 1

  description BVI 1

  mac-address 00:00:00:00:xx:xx

  ip address  11.205.205.5  255.255.255.0

  no shutdown

!

!

!

!

!

!

!

no ip tftp server

no ip tftp server overwrite

ip http server

no ip http secure-server

no ip snmp agent

no ip ftp server

no ip scp server

no ip sntp server

!

!

!

!

no snmp-server enable traps

!

!

!

!

!

line con 0

  no login

!

line telnet 0 4

  login

  no shutdown

line ssh 0 4

  login local-userlist

  no shutdown

!

!

!

!

!

end