Hi,
I know that it's not an usual question for this kind of router, but I use it for my office at home. It works well for my Voip linked with my office. Since I have this router, I can't get my xbox live connection work well. I tried several things and I always have a message saying my NAT type is not setted right on my xbox.Here's the links on how to resole this issue on simpler routers : Xbox NAT Type | Xbox 360 NAT Type | Xbox NAT Error - Xbox.com . Last this I tried is to forward ports they says but it does not work. If I telnet from outside for exemple on port 3074, I can see on my public interface the traffic going on my xbox's staitc IP, but I still having the problem.
Can anyone help me?
thanks
Thank you for asking this question in the support community. There are a couple configurations that can be used to make this work in AOS devices. I would recommend the command ip firewall nat-preserve-source-port record-source-address.
The ip firewall nat-preserve-source-port command enables the firewall to preserve the source port of a Transmission Control Protocol (TCP) or User Datagram Protocol (UDP) session for traffic going through source network address translation (NAT). By enabling this feature, the router will try to allocate NAT ports that match the original source ports of the traffic. If the source port is already allocated for a different traffic flow, it will choose the next available source port. Further, the record-source-address optional command specifies that the original source port be preserved for multiple TCP/UDP traffic flows with the same source address.
One thing to note is that specifying record-source-address consumes 250 k of memory per public NAT IP address. Be sure there is adequate memory available before enabling this feature.
I hope that makes sense, but please do not hesitate to reply to this post with additional information or questions. I will be happy to help in any way I can.
Levi
Thank you for asking this question in the support community. There are a couple configurations that can be used to make this work in AOS devices. I would recommend the command ip firewall nat-preserve-source-port record-source-address.
The ip firewall nat-preserve-source-port command enables the firewall to preserve the source port of a Transmission Control Protocol (TCP) or User Datagram Protocol (UDP) session for traffic going through source network address translation (NAT). By enabling this feature, the router will try to allocate NAT ports that match the original source ports of the traffic. If the source port is already allocated for a different traffic flow, it will choose the next available source port. Further, the record-source-address optional command specifies that the original source port be preserved for multiple TCP/UDP traffic flows with the same source address.
One thing to note is that specifying record-source-address consumes 250 k of memory per public NAT IP address. Be sure there is adequate memory available before enabling this feature.
I hope that makes sense, but please do not hesitate to reply to this post with additional information or questions. I will be happy to help in any way I can.
Levi
Thanks for the reply. It worked!
As stated above, this command will change the NAT type from Strict to Moderate:
ip firewall nat-preserve-source-port record-source-address
If you need to change it to NAT type OPEN, static assign the IP on the XBOX 360 and create a port forward to it using this ACL:
ip access-list extended web-acl-5
remark XBOX
permit tcp any any eq 3074 log
permit udp any any eq 3074 log
permit udp any any eq 88 log
How to configure port forwarding: