First time using the 3140. 908's connect and work fine from Gui but this one wants to telnet/SSH connect and I'm not getting in. Using Putty.
Are you getting a login prompt but authentication fails, or no login prompt, or connection refused?
What does the last few lines of your configuration look like beginning with "line telnet 0 4"
Are you getting a login prompt but authentication fails, or no login prompt, or connection refused?
What does the last few lines of your configuration look like beginning with "line telnet 0 4"
I have a very similar situation, have a 3140, we've used them before, and have always run into this, which is unite runs and performs nicely. We can use web console, or serial console, but the ssh-server. We never get that running.
line ssh 0 4
login local-userlist
no shutdown
But can't connect to giga 0/1, which is the LAN port for us, in this case 10.4.0.212. When you look at the web interface, and the config file, both state the ssh-server is on. What am I missing? Do I need to assign it to giga 0/1 or port forward it to that port?
I'm not quite sure what "line" refers to;
Thank you for any help or direction you can give.