how do i get the interface LED's to light up when i plug in a cable?

[jkrier2014]

hello all!!

this is my first time posting, so forgive me if i get something wrong...

anyway, i have a 1534p and the LED's above the interfaces are not lighting up when i plug in a cable.  the interface comes up and will pass traffic, but i would like a visual indicator that the interface is up.  anybody know the commands to enable the LED's?

thanks in advance!

1534P-2#sho int g 0/12
giga-swx 0/12 is UP, line protocol is UP

ADTRAN, Inc. OS version R10.9.1
  Mainline Version: ENM.13.100
  P4 Changelist: 102711
  Checksum: 562E9C8D
  Built on: Thu Oct 10 22:34:45 2013
  Upgrade key: 37fe2c302978c29267f53ec5800f2fea
Boot ROM version 17.09.01.00
  Checksum: 1D2C
  Built on: Fri Sep 24 13:25:20 2010
Copyright (c) 1999-2013, ADTRAN, Inc.
Platform: NetVanta 1534P, part number 1702591G1
Serial number LBADTN1411AH782
Flash: 33554432 bytes  DRAM: 134217727 bytes

[jkrier2014]

FOUND IT!!!  for anybody that has an Adtran POE switch....

The LED's show both link status and POE status (if the connected device is getting power).  If you plug in a computer, and the link light does NOT come on, push the small button on the left side of the front of the switch.  This button will switch the status LED between "Link" and "Power".

This pertains to a 1534P switch.