UDP / forwarded

[Anonymous]

i have next configuration:

Switch NetVanta 1544PF Network Core Switch IP Routing Enable

Vlan from 1 to 15

VLAN_3_SERVER_VLAN Interface IP 192.168.3.254

WIN2008PDC (DNSA)

IP: 192.168.3.1

Mask: 255.255.255.0

GW: 192.168.3.254

VLAN_1 Interface IP 199.77.2.253

WIN2003BDC (DHCP)(DNSB)

IP: 199.77.1.1

Mask: 255.255.128.0

GW: 199.77.2.253

my question is from vlan15 only i can see host of the same vlan

i have UDP forwarded Enable

for example

VLAN 15 Ip Helper 199.77.1.1 (DHCP)(DNSB)

VLAN 15 ip Helper 192.168.3.1 (AD)(DNSA)

my pc configuration

VLAN_15_IT_VLAN Interface 192.168.15.254

IP: 192.168.15.149

Mask: 255.255.255.0

GW: 192.168.15.254

DNSA: 192.168.3.1

DNSB: 199.77.1.1

Nslookup is working

i made a ping to some host in others vlan and is working

DNS is working the problem is the netbios

what i have to check?

[Anonymous · Accepted solution]

:

Thank you for asking this question in the support community.  Do you have UDP-relay configured as well as IP helper?  Here is a guide on Configuring UDP Relay in AOS.

Also, this post explains how to forward DHCP and netbios:  https://supportforums.adtran.com/message/1975#1975

I hope that makes sense, but please do not hesitate to reply to this post with additional information or questions.  I will be happy to help in any way I can.

Levi

[Anonymous]

:

I went ahead and flagged this post as “Assumed Answered.”  If any of the responses on this thread assisted you, please mark them as either Correct or Helpful answers with the applicable buttons.  This will make them visible and help other members of the community find solutions more easily.  If you still need assistance, I would be more than happy to continue working with you on this - just let me know in a reply.

Levi

[Anonymous]

:

I went ahead and flagged the "Correct Answer" on this post to make it more visible and help other members of the community find solutions more easily. If you don't feel like the answer I marked was correct, feel free to come back to this post and unmark it and select another in its place with the applicable buttons.  If you still need assistance, we would be more than happy to continue working with you on this - just let us know in a reply.

Thanks,

Levi