cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
matthew
New Contributor II

Spanning-Tree Topology Change Monitoring/Trigger?

Jump to solution

I need to more closely monitor the Spanning-Tree topology changes on our Adtran Netvanta switched network. Is there a mechanism on the 1600 series that I could set up to trigger on the switches when a topology change occurs? An email trigger or an SNMP trap maybe? I have set up triggered emails of config cmds already, could I do something similar for STP topology changes?

Thanks in advance!

Labels (1)
Tags (2)
0 Kudos
1 Solution

Accepted Solutions
Anonymous
Not applicable

Re: Spanning-Tree Topology Change Monitoring/Trigger?

Jump to solution

@matthew - There is a MIB that will give you information regarding spanning-tree that you can download from here: https://www.adtran.com/web/page/portal/Adtran/wp_adtranmibs

Unfortunately, I can't think of a way to trigger when an STP topology occurs. However, you could set up persistent debug logging and capture the output of "debug span topology". Instructions on how to set this up can be found here: Enabling Persistent Debug Logging

Let us know if you have any questions.

Thanks,

Noor

View solution in original post

0 Kudos
2 Replies
Anonymous
Not applicable

Re: Spanning-Tree Topology Change Monitoring/Trigger?

Jump to solution

@matthew - There is a MIB that will give you information regarding spanning-tree that you can download from here: https://www.adtran.com/web/page/portal/Adtran/wp_adtranmibs

Unfortunately, I can't think of a way to trigger when an STP topology occurs. However, you could set up persistent debug logging and capture the output of "debug span topology". Instructions on how to set this up can be found here: Enabling Persistent Debug Logging

Let us know if you have any questions.

Thanks,

Noor

0 Kudos
Anonymous
Not applicable

Re: Spanning-Tree Topology Change Monitoring/Trigger?

Jump to solution

@matthew -

I went ahead and flagged the "Correct Answer" on this post to make it more visible and help other members of the community find solutions more easily. If you don't feel like the answer I marked was correct, feel free to come back to this post to unmark it and select another in its place with the applicable buttons.  If you have any additional information on this that others may benefit from, please come back to this post to provide an update.  If you still need assistance, we would be more than happy to continue working with you on this - just let us know in a reply.

Thanks,

Noor