Adtran
Help
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Show  only  | Search instead for 
Did you mean: 
bgitech
New Contributor
‎08-14-2014 12:48 PM

Replacing an HP Procurve with Netvanta 1638p

I realize this may be an impossible question to answer. We are upgrading an HP Procurve 2824 switch with a Netvanta 1638p. This switch is in our data center and runs our VMware cluster with 3 nodes including 2 vlans and one being a DMZ. When trying to setup the Adtran I noticed some features are not supported that are in the HP such as Dynamic LACP. Would anyone be able to guide me in the right direction in setting up a similar config in the Adtran? Basically want to plug the new Adtran in and it just works. I tried configuring it already, but when I tried to go live none of the hosts were visible on the network. I know you will probably need more info but here is what I have.

Current HP Configs:

hostname "ProCurve Switch 2824"

snmp-server location "BGI ASP Switch"

interface 9

   no lacp

exit

interface 10

   no lacp

exit

interface 11

   no lacp

exit

interface 12

   no lacp

exit

interface 19

   no lacp

exit

interface 20

   no lacp

exit

trunk 10,12 Trk2 Trunk

trunk 9,11 Trk1 Trunk

trunk 19-20 Trk3 Trunk

ip default-gateway 10.10.10.253

snmp-server community "public" Unrestricted

snmp-server host 10.0.0.69 "public" Not-INFO

vlan 1

   name "DEFAULT_VLAN"

   untagged 1-8,13-18,21-22,24,Trk1-Trk3

   ip address 10.0.0.240 255.255.255.0

   no untagged 23

   jumbo

   exit

vlan 100

   name "DMZ"

   untagged 23

   tagged Trk1-Trk3

   jumbo

   exit

fault-finder bad-driver sensitivity high

fault-finder bad-transceiver sensitivity high

fault-finder bad-cable sensitivity high

fault-finder too-long-cable sensitivity high

fault-finder over-bandwidth sensitivity high

fault-finder broadcast-storm sensitivity high

fault-finder loss-of-link sensitivity high

fault-finder duplex-mismatch-HDx sensitivity high

fault-finder duplex-mismatch-FDx sensitivity high

spanning-tree Trk1 priority 4

spanning-tree Trk2 priority 4

spanning-tree Trk3 priority 4

password manager

AdTran Configs:

hostname "LightBound"

enable password encrypted 202c18376add9b9b469c7357e374ba02a34b

!

clock timezone -5-Eastern-Time

!

ip subnet-zero

ip classless

ip default-gateway 10.10.10.253

ip routing

domain-name "buchanangroup.local"

name-server 10.10.10.3 10.0.0.10

!

!

ip route-cache express

!

no auto-config

!

event-history on

no logging forwarding

logging email on

logging email priority-level warning

logging email receiver-ip mail.buchanangroup.org

logging email address-list techsupport@buchanangroup.org

!

service password-encryption

!

username "admin" password encrypted "404ca3ea1cde51a4da9c11b39d871619f745"

!

aaa on

ftp authentication LoginUseLocalUsers

!

!

aaa authentication login LoginUseTacacs group tacacs+

aaa authentication login LoginUseRadius group radius

aaa authentication login LoginUseLocalUsers local

aaa authentication login LoginUseLinePass line

!

aaa authentication enable default enable

!

aaa authentication port-auth default local

!

!

no dot11ap access-point-control

no dos-protection

no desktop-auditing dhcp

no network-forensics ip dhcp

!

!

!

!

!

!

!

!

!

vlan 1

  name "Default"

!

vlan 100

  name "DMZ"

!

interface port-channel 1

  description Trk1

  no shutdown

  switchport mode trunk

interface port-channel 2

  description Trk2

  no shutdown

  switchport mode trunk

interface port-channel 3

  description Trk3

  no shutdown

  switchport mode trunk

!

interface eth 0/1

  ip address dhcp

  shutdown

!

!

interface gigabit-switchport 0/1

  no shutdown

!

interface gigabit-switchport 0/2

  no shutdown

!

interface gigabit-switchport 0/3

  no shutdown

!

interface gigabit-switchport 0/4

  no shutdown

!

interface gigabit-switchport 0/5

  no shutdown

!

interface gigabit-switchport 0/6

  no shutdown

!

interface gigabit-switchport 0/7

  no shutdown

!

interface gigabit-switchport 0/8

  no shutdown

!

interface gigabit-switchport 0/9

  no shutdown

  channel-group 1 mode on

!

interface gigabit-switchport 0/10

  no shutdown

  channel-group 2 mode on

!

interface gigabit-switchport 0/11

  no shutdown

  channel-group 1 mode on

!

interface gigabit-switchport 0/12

  no shutdown

  channel-group 2 mode on

!

interface gigabit-switchport 0/13

  no shutdown

!

interface gigabit-switchport 0/14

  no shutdown

!

interface gigabit-switchport 0/15

  no shutdown

!

interface gigabit-switchport 0/16

  no shutdown

!

interface gigabit-switchport 0/17

  no shutdown

!

interface gigabit-switchport 0/18

  no shutdown

!

interface gigabit-switchport 0/19

  no shutdown

  channel-group 3 mode on

!

interface gigabit-switchport 0/20

  no shutdown

  channel-group 3 mode on

!

interface gigabit-switchport 0/21

  no shutdown

!

interface gigabit-switchport 0/22

  no shutdown

!

interface gigabit-switchport 0/23

  no shutdown

  switchport access vlan 100

!

interface gigabit-switchport 0/24

  no shutdown

!

interface gigabit-switchport 0/25

  no shutdown

!

interface gigabit-switchport 0/26

  no shutdown

!

interface gigabit-switchport 0/27

  no shutdown

!

interface gigabit-switchport 0/28

  no shutdown

!

interface gigabit-switchport 0/29

  no shutdown

!

interface gigabit-switchport 0/30

  no shutdown

!

interface gigabit-switchport 0/31

  no shutdown

!

interface gigabit-switchport 0/32

  no shutdown

!

interface gigabit-switchport 0/33

  no shutdown

!

interface gigabit-switchport 0/34

  no shutdown

!

interface gigabit-switchport 0/35

  no shutdown

!

interface gigabit-switchport 0/36

  no shutdown

!

interface gigabit-switchport 0/37

  no shutdown

!

interface gigabit-switchport 0/38

  no shutdown

!

interface gigabit-switchport 0/39

  no shutdown

!

interface gigabit-switchport 0/40

  no shutdown

!

interface gigabit-switchport 0/41

  no shutdown

!

interface gigabit-switchport 0/42

  no shutdown

!

interface gigabit-switchport 0/43

  no shutdown

!

interface gigabit-switchport 0/44

  no shutdown

!

interface gigabit-switchport 0/45

  no shutdown

!

interface gigabit-switchport 0/46

  no shutdown

!

interface gigabit-switchport 0/47

  no shutdown

!

interface gigabit-switchport 0/48

  no shutdown

!

!

!

interface vlan 1

  ip address  10.10.10.240  255.255.255.0

  ip route-cache express

  no shutdown

!

!

!

!

!

!

no tftp server

no tftp server overwrite

http authentication LoginUseLocalUsers

http server

no http secure-server

no snmp agent

no ip ftp server

ip ftp server default-filesystem flash

no ip scp server

ip sntp server

!

!

!

!

!

!

!

!

!

line con 0

  login authentication LoginUseLinePass

!

line telnet 0 4

  login authentication LoginUseLinePass

  shutdown

line ssh 0 4

  login authentication LoginUseLocalUsers

  no shutdown

!

!

!

!

end

0 Kudos
Reply
1 Reply
Anonymous
Not applicable
‎08-15-2014 12:15 PM

Re: Replacing an HP Procurve with Netvanta 1638p

this is how I set it up,  I curently only have one vlan but set up as trunk so I can add as needed.

interface port-channel 10

  description HP_VMware

  spanning-tree bpdufilter enable

  spanning-tree bpduguard enable

  spanning-tree edgeport

  no shutdown

  switchport mode trunk

  switchport trunk native vlan 67

  switchport trunk allowed vlan 67

  qos trust cos

!

!

interface gigabit-switchport 1/0/48

  no shutdown

  qos trust cos

  channel-group 10 mode on

!

!

interface gigabit-switchport 2/0/48

  no shutdown

  qos trust cos

  channel-group 10 mode on

!

I set the vm nic teaming:"Load balancing =route based on IP hash", "Network Failure Detection=link status only", "notify switches=yes", Faiback=yes"

0 Kudos
Accept as Solution Reply