Adtran
Help
The Adtran community holiday season is starting next week! The holiday period will span from December 21, 2024 to January 6, 2025. During this time, responses to feedback form submissions may be delayed. If you are encountering product issues, you can reach out to Adtran support at any time.
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Show  only  | Search instead for 
Did you mean: 
dalexander
New Contributor
‎10-31-2019 10:29 AM

Missing Syslog after reboot

Adtran 1550 Syslog is missing after reboot. I need to prevent this. I also need to know how to extend the buffer of the syslog as its crazy short right now.

0 Kudos
Reply
2 Replies
Anonymous
Not applicable
‎10-31-2019 11:50 AM

Re: Missing Syslog after reboot

  • If the syslog configuration is not in the startup-configuration file, it will not be preserved after a reboot.
    Once you have the switch configured and everything including syslog is working, you can run the CLI command "wr"  for write, or the command " copy run start ".
  • Buffer of the switch log is not configurable and is short for switch memory reason.  This is why a syslog is used, when needed.

  • This is a NV1550 , so it should be running the EMR firmware release.  If it has not been upgraded since it was taken out of the box, you will experience many bad issues. 
    Shipping firmware is only to allow upgrading to the Supported EMR release.
0 Kudos
Accept as Solution Reply
dalexander
New Contributor
‎10-31-2019 12:21 PM

Re: Missing Syslog after reboot

Thank you Jroad, Do you know if the syslog will overwrite itself when at max buffer?

0 Kudos
Accept as Solution Reply