cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
irishrocks
New Contributor

Netvanta 1335 PoE cant ping or enter GUI until power cycle then can for 30 minutes or so to an hours then same thing.

Down loaded the config last time I power cycled device. The switch seems to be still working for the most part but cannot get to any of the Vlan interfaces on the switch but the all the devices on the switch seem to work fine that are already configured. But a new IP phone cannot reach the DHCP set up on that switch. I'm going to try to update the firmware but we have another exact switch with the same firmware but no problems.

Labels (1)
0 Kudos
1 Reply

Re: Netvanta 1335 PoE cant ping or enter GUI until power cycle then can for 30 minutes or so to an hours then same thing.

So I upgraded the Firmware to the latest patch release and it seems to have fixed my problem. its been working for almost 24 hours instead of the 30 minutes or so after unplugging and plugging it back in.