How do I turn a port off then back on via the CLI ? I have done this before but cannot remember ? I am working a Netvanta 1238.
Thank you for posting this question in the Support Community. To disable and re-enable a switchport on the NetVanta 1238 you will issue the shutdown followed by the no shutdown commands. For example:
ROUTER-NAME# configure terminal
ROUTER-NAME(config)# interface switchport 0/1
ROUTER-NAME(config-swx 0/1)# shutdown
ROUTER-NAME(config-swx 0/1)# no shutdown
I hope that makes sense, but please do not hesitate to reply to this post with any additional questions related to this topic.
Levi
Thank you for posting this question in the Support Community. To disable and re-enable a switchport on the NetVanta 1238 you will issue the shutdown followed by the no shutdown commands. For example:
ROUTER-NAME# configure terminal
ROUTER-NAME(config)# interface switchport 0/1
ROUTER-NAME(config-swx 0/1)# shutdown
ROUTER-NAME(config-swx 0/1)# no shutdown
I hope that makes sense, but please do not hesitate to reply to this post with any additional questions related to this topic.
Levi
I went ahead and flagged the "Correct Answer" on this post to make it more visible and help other members of the community find solutions more easily. If you don't feel like the answer I marked was correct, feel free to come back to this post and unmark it and select another in its place with the applicable buttons. If you still need assistance, we would be more than happy to continue working with you on this - just let us know in a reply.
Thanks,
Levi