cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Anonymous
Not applicable

PSK & AP Control Channel Timeout

If I read correctly, vWLAN/AP firmware 3.2+ fixes an issue that caused WPA2-PSK ("Personal") SSIDs from dropping if the AP Control Channel is lost. Is there anything special in the configuration to ensure that?

0 Kudos
1 Reply
Anonymous
Not applicable

Re: PSK & AP Control Channel Timeout

There are two use cases:

  1. Default Registered Role
  2. Captive Portal Authentication

If you are just using default role assignment (ie. Enable Captive Portal Authentication is unchecked and a Registered Role is assigned), then there is nothing special you would need to do. The AP will handle it automatically. If you are using captive portal, then you just need to check Allow new clients to use the network when vWLAN is down and assign a role.