Controller for a Bluesocket AP

[Anonymous]

Is it possible to use a Netvanta 1200 series switch to controll a Bluesocket AP or do I need to use the Bluesocket controller?

Chris

[Anonymous · Accepted solution]

Thanks, Chris. A Bluesocket Access Point can only be controlled with either the Bluesocket vWLAN or BSC architecture. The next-generation vWLAN is a fully distributed platform which enables complete virtualization of the control plane, eliminating the need for controller hardware. Alternatively, the BSC platform is a hardware controller platform. At this time, it is not possible to control a Bluesocket Access Point with a Netvanta 1200 series switch.

Best,

Erik

[Anonymous]

Thanks for the info and quick response Erik!

Chris

[Anonymous]

Chris, I went ahead and flagged this post as “Assumed Answered”.  If any of the responses on this thread assisted you, please mark them as Correct or Helpful answers as the case may be with the applicable buttons.  This will make them visible and help other members of the community find solutions more easily.  If you still need assistance, I would be more than happy to continue working with you on this - just let me know in a reply.

Best,

Erik

[Anonymous]

I went ahead and flagged the "Correct Answer" on this post to make it more visible and help other members of the community find solutions more easily. If you don't feel like the answer I marked was correct, feel free to come back to this post and unmark it and select another in its place with the applicable buttons.  If you still need assistance, we would be more than happy to continue working with you on this - just let us know in a reply.

Thanks,

Erik