DS0 Status Prt 123456789012345678901234
x 1 .......................D
x 2 ------------------------
x 3 ------------------------
x 4 ------------------------
Based on the DS0 Status, only the first port on that module is configured. Your DIAL PLAN and USER TERM should have at least 4 entries, one for each port on the module.
If you are having trouble adding an additional entry, move the cursor to the line number (under the "#") to the left of the SLOT/SERVICE and hit the letter "i" (for insert) and a new line should show up. (The letter "d" is for delete - to remove an entry.)
Hope this helps,
Patrick
Based on the DS0 Status, only the first port on that module is configured. Your DIAL PLAN and USER TERM should have at least 4 entries, one for each port on the module.
If you are having trouble adding an additional entry, move the cursor to the line number (under the "#") to the left of the SLOT/SERVICE and hit the letter "i" (for insert) and a new line should show up. (The letter "d" is for delete - to remove an entry.)
Hope this helps,
Patrick
Patrick,
Thanks for the quick response! That fixed the problem. I also switched from using putty to Tera Term with VT 100 emulation, and could clearly see the menu layout with the INS/DEL option. Now all 4 interfaces are enabled and working.
Thanks again