I'm new to the adtran atlas 550. I'm using it for now 2 months. I'm trying to do a network with 3 cisco router 2811. It is a frame relay network using T1 card. The main problem is the Quat T1/pri module.The status goes from online to error 1 sec every 30 sec. The network isn't working. I've done all the maping, set the clock internal, enterred my DLCIs. There's no alarm. The adtran is sending package to the router but this one does not respond. On the router, all my network is set. here's an exemple of my 2811 config.
version 12.4
service timestamps debug datetime msec
service timestamps log datetime msec
no service password-encryption
!
hostname R1
!
boot-start-marker
boot-end-marker
!
card type t1 0 0
!
no aaa new-model
!
resource policy
!
no network-clock-participate wic 0
!
ip cef
!
no ip domain lookup
!
voice-card 0
no dspfarm
!
!
controller T1 0/0/0
framing esf
linecode b8zs
channel-group 0 timeslots 1-24
!
interface Tunnel1
no ip address
tunnel source Serial0/0/0:0
!
interface FastEthernet0/0
no ip address
shutdown
duplex auto
speed auto
!
interface FastEthernet0/1
ip address 192.168.10.1 255.255.255.0
duplex auto
speed auto
!
interface Serial0/0/0:0
no ip address
encapsulation frame-relay IETF
!
interface Serial0/0/0:0.20 point-to-point
description link to R3 router DLCI 20
ip address 192.168.1.1 255.255.255.0
frame-relay interface-dlci 20
!
interface Serial0/0/0:0.22 point-to-point
description link to R2 DLCI 22
ip address 192.168.3.1 255.255.255.0
frame-relay interface-dlci 22
!
interface Serial0/3/0
no ip address
shutdown
no fair-queue
clock rate 2000000
!
interface Serial0/3/1
no ip address
encapsulation frame-relay
!
interface Integrated-Service-Engine1/0
no ip address
shutdown
no keepalive
!
router eigrp 100
network 192.168.1.0
network 192.168.3.0
network 192.168.10.0
auto-summary
!
no ip http server
no ip http secure-server
!
control-plane
voice-port 0/1/0
voice-port 0/1/1
voice-port 0/2/0
voice-port 0/2/1
!
gatekeeper
shutdown
!
line con 0
password cisco
logging synchronous
login
line aux 0
line 66
no activation-character
no exec
transport preferred none
transport input all
transport output lat pad telnet rlogin lapb-ta mop udptn v120 ssh
line vty 0 4
password cisco
login
!
scheduler allocate 20000 1000
!
end
The real question is : Where's the problem? Im working on this for 2 weeks now. Any solutions why my card give me an error each 30 sec?
