cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Anonymous
Not applicable

NV3140 unknow in n_command 7.1.7-12038

Jump to solution

Hi to all,

We've got a new NV3140 that are showing up as Unknow devices type. Is there an update or a config to correct this?

Thank you.

Tags (3)
0 Kudos
1 Solution

Accepted Solutions
Anonymous
Not applicable

Re: NV3140 unknow in n_command 7.1.7-12038

Jump to solution

Joel,

You should be able to upgrade to the 8.1.1 release of MSP to resolve this. In addition, you may find the following information helpful: n-Command MSP Device Definitions and Devices that show up as "Unknown" .

Please do not hesitate to let us know if you have any further questions.

Thanks,

Noor

View solution in original post

2 Replies
Anonymous
Not applicable

Re: NV3140 unknow in n_command 7.1.7-12038

Jump to solution

Joel,

You should be able to upgrade to the 8.1.1 release of MSP to resolve this. In addition, you may find the following information helpful: n-Command MSP Device Definitions and Devices that show up as "Unknown" .

Please do not hesitate to let us know if you have any further questions.

Thanks,

Noor

Anonymous
Not applicable

Re: NV3140 unknow in n_command 7.1.7-12038

Jump to solution

Hi Noor,

Many thanks... Update was done. Devices were deleted and did report back correctly!