cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
jwkucera
New Contributor

Newb erased file system 900e unable to access eth 0/1

Hello all,

I'm playing around with some of our 900e equipment and getting started with learning about what to do and what not to do. I've managed to erase the file system so I'm only able to get to the bootstrap# using putty.

I've got firmware to update the 900e and I've used tftp on other Adtran devices with no issues but I'm unable to connect with this one. I'm not getting any signal lights on either ETH 1 or 2 when connected.

Any ideas how to get started? I see that 10.10.10.1 should be the devices IP and I've set my computer's ethernet adapter to 10.10.10.5 but I'm getting nothing. I've tried a few other IP addresses as well. It's really bugging me that I can't get the status lights to blink... What am I missing?

0 Kudos