I have a TA904. Very new to VOIP. I have somehow managed to self teach enough to get a 4 line Innomedia with a business group (metaswitch) that is a hunt group, and an Adtran with four separate, ungrouped lines attached to it. I will say that the way that the company I work for currently barely uses these devices for what they're capable of... these appear to be fully capable of acting as a router in addition to a voip platform. We're only using them for VOIP, and we put them behind routers, to boot.
Is it possible to use the Adtran rather than metaswitch to build a hunt group that rolls over?
The hunt group I have now:
No lines busy. Someone calls in. Line one rings.
Line one busy. Someone calls in. Line two rings.
Lines one and two busy. Someone calls in. Line three rings.
Lines two and three busy. Someone calls in. Line one rings.
All that hunt group is doing is finding an open line.
An example that I want, and whether or not this is doable on the Adtran itself:
No lines busy. Someone calls in. Line one rings.
No lines busy. Someone calls in. Line two rings.
No lines busy. Someone calls in. Line three rings.
etc.
Jon,
Our IPBG FXS user solution only supports the type of hunt group that you currently have configured as outlined here: Configuring Hunt Groups in SIP IPBGs
We do not support "circular" hunting to where the calls are distributed equally between available ports. The IPBG FXS user solution only supports linear.
Let me know if you have any further questions.
-Mark
Ran into a problem.
I didn't have the harmonica on the back since 12/17. We had a shortage and mine had to go out to the field.
Now I have a new one. I'm unaware of anything changing on the adtran. Getting a dial tone, but not able to dial in or out.
Here's the running config.
TA904#show run
Building configuration...
!
!
! ADTRAN, Inc. OS version 14.02.00.E
! Boot ROM version 12.06.00
! Platform: Total Access 904, part number
! Serial number
!
!
hostname "TA904"
enable password pass
!
clock timezone -6-Central-Time
!
ip subnet-zero
ip classless
ip domain-proxy
ip domain-name "ipdomain"
ip routing
!
no auto-config
!
event-history on
no logging forwarding
no logging email
logging email priority-level info
!
no service password-encryption
!
username "admin" password "pass"
username "operations" password "pass"
!
!
no ip firewall alg msn
no ip firewall alg h323
!
!
!
!
!
!
!
!
!
!
!
!
interface eth 0/1
ip address dhcp hostname "Test904"
media-gateway ip primary
no shutdown
!
!
!
!
interface t1 0/1
no shutdown
!
interface t1 0/2
no shutdown
!
!
interface fxs 0/1
no shutdown
!
interface fxs 0/2
no shutdown
!
interface fxs 0/3
no shutdown
!
interface fxs 0/4
no shutdown
!
!
!
!
!
!
!
ip access-list extended protect-acl
permitted ips
deny ip any any log
!
!
!
no ip tftp server
no ip tftp server overwrite
no ip http server
no ip http secure-server
no ip snmp agent
no ip ftp server
no ip scp server
no ip sntp server
!
!
!
!
!
!
!
voice feature-mode network
!
!
!
!
!
!
!
!
!
voice codec-list TRUNK
default
codec g711ulaw
!
!
voice trunk T01 type sip
sip-server primary phoneserver
registrar primary phoneserver
outbound-proxy primary phoneserver
domain "phoneserver"
codec-group TRUNK
!
!
voice grouped-trunk NETWORK
no description
trunk T01
accept $ cost 0
!
!
!
!
voice user number
connect sip
password "pin"
no call-waiting
sip-identity number T01 register auth-name "number" password "pass"
vad
modem-passthrough
codec-group TRUNK
!
!
voice user number
connect fxs 0/2
password "pin"
sip-identity number T01 register auth-name "number" password "pass"
vad
modem-passthrough
codec-group TRUNK
!
!
voice user number
connect fxs 0/3
password "pin"
sip-identity number T01 register auth-name "number" password "pass"
vad
modem-passthrough
codec-group TRUNK
!
!
voice user number
connect fxs 0/4
password "pin"
sip-identity number T01 register auth-name "number" password "pass"
vad
modem-passthrough
codec-group TRUNK
!
!
!
!
!
ip sip
!
!
!
!
!
line con 0
login local-userlist
!
line telnet 0 4
login
password password
line-timeout 0
no shutdown
line ssh 0 4
login local-userlist
no shutdown
!
sntp server X.X.X.X
!
end
Also can't seem to get udp 5060 up.
TA904(config)#sip udp 5060
% Unrecognized command
Again...this worked up until now. Could I have a bad harmonica?
you are running crazy old software, first thing you need to do is upgrade your software on your unit.
after you do that and reboot, verify that you are registered:
#show sip trunk-registration
should look something like this:
Trk Identity Reg'd Grant Expires Success Failed Requests Chal Roll
--- -------------------- ----- ------- ------- ------- ------ -------- ---- ----
T01 7709631001 Yes 3600 758 762 1 1524 762 0
T01 4409631001 Yes 3600 758 762 1 1524 762 0
T01 5509631001 Yes 3600 758 762 1 1524 762 0
T01 7709631002 Yes 3600 758 762 1 1524 762 0
if it shows your registered but still not able to place calls, then enter the following debug and attach it to the post via the website as a text document.
debug sip stack mes
debug voice verbose
debug sip cldu
-Mark
I had a feeling that was going to be one of the issues.
I'm running a TA904.
I'm seeing multiple generations of firmware. Which do I go with?
TA904#
12:43:42 PM.0:1 Idle Processed OFFHOOK
12:43:42 PM.0:1 State change >> Idle->Requesting Dialtone
12:43:42 SA. Ca:0 Idle rcvd: AcctPhoneMgr_appearance(ON) from PM
12:43:42 SA. Ca:0 State change >> Idle->DigitGathering
12:43:42 SA. Ca:0 DigitGathering sent: AcctPhoneMgr_cachg(CAS_ReqDigits) to PM
12:43:42 PM.0:1 Requesting Dialtone CACHG:ReqDigits on primary CA
12:43:42 PM.0:1 State change >> Requesting Dialtone->SendingDigits
12:43:42 TONESERVICES.EVENTS fxs 0/1 - empty - DialTone Generation: Request resource
12:43:42 TONESERVICES.EVENTS fxs 0/1 - dsp 0/1.3 - DialTone Generation: DSP channel allocated for the resource
12:43:42 TONESERVICES.EVENTS fxs 0/1 - dsp 0/1.3 - DialTone Generation: constructed
12:43:42 TONESERVICES.EVENTS fxs 0/1 - dsp 0/1.3 - DialTone Generation: starting
12:43:42 TONESERVICES.EVENTS fxs 0/1 - dsp 0/1.3 - DialTone Generation: TDM map
12:43:42 TONESERVICES.EVENTS fxs 0/1 - empty - Tone Detection: Request resource
12:43:42 TONESERVICES.EVENTS fxs 0/1 - dsp 0/1.3 - Tone Detection: DSP channel allocated for the resource
12:43:42 TONESERVICES.EVENTS fxs 0/1 - dsp 0/1.3 - Tone Detection: constructed
12:43:42 TONESERVICES.EVENTS fxs 0/1 - dsp 0/1.3 - Tone Detection: starting
12:43:42 TONESERVICES.EVENTS fxs 0/1 - dsp 0/1.3 - Tone Detection: TDM map
12:43:45 PM.0:1 SendingDigits Digit 6 processed
12:43:45 TONESERVICES.EVENTS fxs 0/1 - dsp 0/1.3 - Tone Detection: received digit (6) event
12:43:45 TONESERVICES.EVENTS fxs 0/1 - dsp 0/1.3 - DialTone Generation: stopping
12:43:45 TONESERVICES.EVENTS fxs 0/1 - dsp 0/1.3 - DialTone Generation: TDM unmap
12:43:45 RTP.CHANNEL fxs 0/1 - dsp 0/1.3 - DialTone Generation: releasing RTP resource
12:43:45 TONESERVICES.EVENTS fxs 0/1 - dsp 0/1.3 - DialTone Generation: release
12:43:45 SA. Ca:0 DigitGathering rcvd: AcctPhoneMgr_dialDigit(6) from PM
12:43:45 PM.0:1 SendingDigits Digit 0 processed
12:43:45 TONESERVICES.EVENTS fxs 0/1 - dsp 0/1.3 - Tone Detection: received digit (0) event
12:43:45 SA. Ca:0 DigitGathering rcvd: AcctPhoneMgr_dialDigit(0) from PM
12:43:47 PM.0:1 SendingDigits Digit 0 processed
12:43:47 TONESERVICES.EVENTS fxs 0/1 - dsp 0/1.3 - Tone Detection: received digit (0) event
12:43:47 SA. Ca:0 DigitGathering rcvd: AcctPhoneMgr_dialDigit(0) from PM
12:43:48 PM.0:1 SendingDigits Digit 7 processed
12:43:48 TONESERVICES.EVENTS fxs 0/1 - dsp 0/1.3 - Tone Detection: received digit (7) event
12:43:48 SA. Ca:0 DigitGathering rcvd: AcctPhoneMgr_dialDigit(7) from PM
12:43:48 PM.0:1 SendingDigits Digit 8 processed
12:43:48 TONESERVICES.EVENTS fxs 0/1 - dsp 0/1.3 - Tone Detection: received digit (8) event
12:43:48 SA. Ca:0 DigitGathering rcvd: AcctPhoneMgr_dialDigit(8) from PM
12:43:49 PM.0:1 SendingDigits Digit 7 processed
12:43:49 TONESERVICES.EVENTS fxs 0/1 - dsp 0/1.3 - Tone Detection: received digit (7) event
12:43:49 SA. Ca:0 DigitGathering rcvd: AcctPhoneMgr_dialDigit(7) from PM
12:43:53 SA. Ca:0 State change >> DigitGathering->DigitGathering
12:43:53 SA. Ca:0 State change >> DigitGathering->Idle
12:43:53 SA. Ca:0 Idle sent: AcctPhoneMgr_cachg(CAS_Idle) to PM
12:43:53 PM.0:1 SendingDigits Pri CA, Idle response, App OFF sent
12:43:53 PM.0:1 State change >> SendingDigits->Clearing Fast Busy
12:43:53 SA. Ca:0 DigitGathering Call not allowed under current COS
12:43:53 SA. Ca:0 Idle rcvd: AcctPhoneMgr_appearance(OFF) from PM
12:43:53 TONESERVICES.EVENTS fxs 0/1 - empty - FastBusy Generation: Request resource
12:43:53 TONESERVICES.EVENTS fxs 0/1 - dsp 0/1.3 - FastBusy Generation: DSP channel allocated for the resource
12:43:53 TONESERVICES.EVENTS fxs 0/1 - dsp 0/1.3 - FastBusy Generation: constructed
12:43:53 TONESERVICES.EVENTS fxs 0/1 - dsp 0/1.3 - FastBusy Generation: starting
12:43:53 TONESERVICES.EVENTS fxs 0/1 - dsp 0/1.3 - FastBusy Generation: TDM map
12:43:53 PM.0:1 Clearing Fast Busy FXS Port OffHook
12:43:56 PM.0:1 Clearing Fast Busy Processed OnHook from non-holding condition
12:43:56 PM.0:1 State change >> Clearing Fast Busy->Idle
12:43:56 TONESERVICES.EVENTS fxs 0/1 - dsp 0/1.3 - FastBusy Generation: stopping
12:43:56 TONESERVICES.EVENTS fxs 0/1 - dsp 0/1.3 - FastBusy Generation: TDM unmap
12:43:56 RTP.CHANNEL fxs 0/1 - dsp 0/1.3 - FastBusy Generation: releasing RTP resource
12:43:56 TONESERVICES.EVENTS fxs 0/1 - dsp 0/1.3 - FastBusy Generation: release
12:43:56 TONESERVICES.EVENTS fxs 0/1 - dsp 0/1.3 - Tone Detection: stopping
12:43:56 TONESERVICES.EVENTS fxs 0/1 - dsp 0/1.3 - Tone Detection: TDM unmap
12:43:56 RTP.CHANNEL fxs 0/1 - dsp 0/1.3 - Tone Detection: releasing RTP resource
12:43:56 TONESERVICES.EVENTS fxs 0/1 - dsp 0/1.3 - Tone Detection: release
12:43:56 SA. rcvd: AcctPhoneMgr_COSOverride from PM
You want to get the maint release which is R12.3.4
-Mark
Is that all your debug? You want to be telneting or SSH into the unit to get these debug and not serial.
Do a show debug
Looks like you dialed 600787
What did you actually dial?
You have no dial plan entries so you currently have to hit # or wait 4 seconds for call to complete.
Here are some examples:
voice dial-plan 1 local NXX-NXX-XXXX
voice dial-plan 2 long-distance 1-NXX-NXX-XXXX
voice dial-plan 3 extensions MXXX
voice dial-plan 4 international 011$
getting error:
12:43:53 SA. Ca:0 DigitGathering Call not allowed under current COS
Upgrade firmware.
-Mark
So uh...
%Disk Full or allocation exceeded....
bootstrap#show flash
2010 bytes used, 15301125 available, 15303135 total
bootstrap#
T900E3A-R12-3-4-E.biz
28,993,880 bytes
So um. How does one stick a 30mb file into a system that can only handle 15mb that is also readable by bootstrap?
Huh.
bootstrap#boot system flash TA900EA-A4-11-00-E.biz
%Bad file signature.
'NONVOL:/TA900EA-A4-11-00-E.biz' is not a valid image.
Primary image error. Primary boot configuration not updated!!!
bootstrap#show flash
11195087 TA900EA-A4-11-00-E.biz
11197710 bytes used, 4105425 available, 15303135 total
bootstrap#
Boot ROM version 12.06.00 from 2006.
Not finding boot roms.
You downloaded a 900e file, you said you had a 904.
Do you have 904 or 908e
Do a sh version in bootstrap and send results.
-Mark
You have to delete the old version first then upload the new version.
But first we need to verify what actual unit you have to make sure you have the right firmware.
-Mark
I went where you linked me. I didn't see anything specific to a 904. It said 900/900e "series". You type in 904 firmware into search, it all comes up as 900/900e series.
Boot ROM version 12.06.00
Checksum: 8645, built on: Mon Aug 28 13:50:55 2006
Copyright (c) 1999-2006, ADTRAN, Inc.
Platform: Total Access 904, Part number 4210904L1
Serial number G40D9788
I think I see why we have a 604 on the shelf, too. Probably the same mistake.
You have a very very old unit. It is first gen.
Latest firmware release for that is Jan 2012!
I would strongly recommend getting an newer unit.
But if you have to use this, then you will need to reload the software on it.
Go here: https://portal.adtran.com/web/page/portal/Adtran/wp_support_softwarereleases/
Then select total access > Total Access 900 series > Total Access 904 (1st Gen)
Then upload that to the unit.
You will probably need to call support to get them to help you if you plan to use this unit with old firmware. I don’ t have a 1st gen around to test it with.
-Mark
Yeah, I did finally find that.
Found something for the 604 too.
T900G2A-R12-3-4-E.biz wasn't valid, which was more or less expected.
TA900A-A4-11-00-E.biz did verify.... and load.
That ones good.
Little off about this other one though...
bootstrap#show version
Boot ROM version 12.00.19
Checksum: 409B, built on: Mon Feb 13 15:21:45 2006
Copyright (c) 1999-2006, ADTRAN, Inc.
Platform: Total Access 904, ADSL, Part number 4210904L4
Serial number G15C1865
On the outside it says "Total Access 604"
I am going to take a guess that someone popped the wrong bootrom on?
Yeah not sure, it is showing up as an ADSL unit which we had for 600 series in the past.
You probably need to get on the phone with support to find out what is going on.
Sorry I can’t be of more assistance.
-Mark