The Adtran community holiday season is starting next week! The holiday period will span from December 21, 2024 to January 6, 2025. During this time, responses to feedback form submissions may be delayed. If you are encountering product issues, you can reach out to Adtran support at any time.
cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
tech706
New Contributor

Having trouble with dial plan on 900e

The setup has the fxs port registered as sip endpoint. When I make calls that match the default dial plan the call cuts through immediately. If I try to make a call that requires a star code first there is about a four second delay before the call is cut through. I have tried about every combo in the dial plan, even trying the exact number and there is still a delay. The testing has been done with the *82 code to a long distance number.

Also, is there a way to insert a recall tone or a confirmation tone after certain digits are dialed. I looked through the documentation and could not find a reference.

Thank you for your help.

voice feature-mode network

voice forward-mode network

!

!

!

!

!

!

!

!

voice timeouts named-digit-timeout quick 2

!

voice dial-plan 1 local NXX-NXX-XXXX

voice dial-plan 2 long-distance 1-NXX-NXX-XXXX

voice dial-plan 3 international 011$

voice dial-plan 4 operator-assisted 0$

voice dial-plan 5 user1 N11

voice dial-plan 6 user1 *82-1-NXX-NXX-XXXX

!

!

!

!

voice codec-list G729First

  codec g729

  codec g711ulaw

!

voice codec-list G711First

  codec g711ulaw

  codec g729

!

!

!

voice trunk T01 type sip

  description "SIP"

  sip-server primary

  registrar primary

  outbound-proxy primary

  domain

!

!

voice grouped-trunk TEST

  trunk T01

  accept NXX-NXX-XXXX cost 0

  accept 1-NXX-NXX-XXXX cost 0

  accept 011-$ cost 0

  accept 411 cost 0

  accept 611 cost 0

  accept 911 cost 0

  accept 311 cost 0

  accept 811 cost 0

  accept *73 cost 0

  accept *72 cost 0

  accept *82-NXX-NXX-XXXX cost 0

  accept *72-1-NXX-NXX-XXXX cost 0

  accept *72-NXX-NXX-XXXX cost 0

  accept *67-1-NXX-NXX-XXXX cost 0

  accept *67-NXX-NXX-XXXX cost 0

  accept *74-N cost 0

  accept *75-NM cost 0

  accept *52-1-NXX-NXX-XXXX cost 0

  accept *52-NXX-NXX-XXXX cost 0

  accept *18 cost 0

  accept *70-1-NXX-NXX-XXXX cost 0

  accept *70-NXX-NXX-XXXX cost 0

  accept *37[12] cost 0

  accept 011X$ cost 0

  accept *78 cost 0

  accept *79 cost 0

  accept *82-1-NXX-NXX-XXXX cost 0

!

!

voice user 1

  connect fxs 0/1

  no cos

  first-name ""

  last-name ""

  password encrypted ""

  sip-identity  T01 register auth-name  password encrypted

  sip-authentication password encrypted 

!

0 Kudos
1 Reply
tech706
New Contributor

Re: Having trouble with dial plan on 900e

I found a solution. I used mgcp protocol so that all the dialing features and control is handled by our softswitch. Works like a champ!