Hello-
I my FXS ports are both only dialing 3 digits without going to fast busy. I set the FXS as an autodial to an external number and it went through no problem... Not sure what I am missing, here is the log from the call "debug voice verbose":
23:54:40.583 PM.0:2 SendingDigits Digit 9 processed
23:54:40.583 TONESERVICES.EVENTS fxs 0/2 - fxs 0/2 - Tone Detection: received digit (9) event
23:54:40.584 SA.106 Ca:0 DigitGathering rcvd: AcctPhoneMgr_dialDigit(9) from PM
23:54:40.584 SA.106 Ca:0 DigitGathering Named-digit-timeout waiting 0 seconds for more digits
23:54:40.584 SA.106 Ca:0 DigitGathering State change >> DigitGathering->DigitGathering (CAS_Active)
23:54:40.585 SA.106 Ca:0 DigitGathering sent: AcctPhoneMgr_cachg(CAS_Active) to PM
23:54:40.585 PM.0:2 State change >> SendingDigits->Call Pending
23:54:40.585 SA.106 Ca:0 DigitGathering sent: call to SB
23:54:40.585 SA.106 Ca:0 DigitGathering State change >> DigitGathering->CallPending (CAS_Active)
23:54:40.586 TONESERVICES.EVENTS fxs 0/2 - fxs 0/2 - Tone Detection: stopping
23:54:40.586 TONESERVICES.EVENTS fxs 0/2 - fxs 0/2 - Tone Detection: TDM unmap
23:54:40.586 RTP.CHANNEL fxs 0/2 - fxs 0/2 - Tone Detection: releasing RTP resource
23:54:40.586 TONESERVICES.EVENTS fxs 0/2 - fxs 0/2 - Tone Detection: release
23:54:40.587 SA.106 rcvd: AcctPhoneMgr_billingCode from PM
23:54:40.587 SB.CALL 65 Idle Called the call routine with 419
here is my sh run voice:
Building configuration...
!
!
voice feature-mode local
voice transfer-mode local
voice forward-mode local
voice conferencing-mode local
!
voice spre-mode local
!
voice dial-plan 0 long-distance NXX-NXX-XXXX
voice dial-plan 1 extensions MXX
voice dial-plan 2 long-distance 1-NXX-NXX-XXXX
!
!
voice codec-list Basic
default
codec g722
codec g711ulaw
codec g711alaw
codec g729
!
!
!
voice trunk T01 type sip
sip-server primary sip27.vitelity.net
registrar primary sip27.vitelity.net
outbound-proxy primary sip27.vitelity.net
domain "sip27.vitelity.net"
max-number-calls 4
!
!
voice grouped-trunk HOME-TRUNKS
trunk T01
accept NXX-NXX-XXXX cost 0
accept 1-NXX-NXX-XXXX cost 0
accept 1-800-NXX-XXXX cost 0
accept 1-888-NXX-XXXX cost 0
accept 1-877-NXX-XXXX cost 0
accept 1-866-NXX-XXXX cost 0
accept 1-855-NXX-XXXX cost 0
accept 411 cost 0
accept 611 cost 0
accept 911 cost 0
accept 82111 cost 0
accept 86 cost 0
reject NXX-976-XXXX
reject 1-900-NXX-XXXX
reject 1-976-NXX-XXXX
!
!
voice user 106
connect fxs 0/2
first-name "Cordless"
last-name "Cordless"
sip-identity FXS-VITELITY T01
codec-list Basic
!
end
You have a dial-plan conflict. This entry in the dial-plan:
voice dial-plan 1 extensions MXX
is causing the unit to process the call as soon as 1XX through 8XX are detected.
Try adding:
voice timeouts named-digit-timeout ext-3-sec 3
then change the extensions dialplan to:
voice dial-plan 1 extensions MXX ext-3-sec
This will allow three seconds after the three-digits before completing a call to an extension in order to allow the user to continue dialing if dialing a PSTN number and not an extension.
You have a dial-plan conflict. This entry in the dial-plan:
voice dial-plan 1 extensions MXX
is causing the unit to process the call as soon as 1XX through 8XX are detected.
Try adding:
voice timeouts named-digit-timeout ext-3-sec 3
then change the extensions dialplan to:
voice dial-plan 1 extensions MXX ext-3-sec
This will allow three seconds after the three-digits before completing a call to an extension in order to allow the user to continue dialing if dialing a PSTN number and not an extension.
Worked like a charm, thanks!