cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
Anonymous
Not applicable

Documentation on Command Results: show rtp quality-monitoring call-history detail

I have been unable to locate any official ADTRAN documentation which explains the comprehensive results provided by this VQM-related command. The result contains 66 lines of values for each RTP stream. It looks like there is some great information for troubleshooting. Some of these parameters reported are self-explanatory. However, MOST have no definition/explanation provided or available (apparently anywhere!).


The document entitled: "Understanding Call Quality Statistics in AOS" (6AOSRG0005-30A) is no help as it does not contain this this level of information. Likewise, "ADTRAN OPERATING SYSTEM (AOS) Command Reference Guide AOS Version R10.9.0" (60000CRG0-35K) is not helpful.

Is there a document available that provides details on the results of this command?

It sure would be nice to have ONE document that contains details on the output shown below.

RTP stream: XXX.XX.XXX.XX:33266, eth 0/1.XXXX -> XXX.X.XX.XXX:10224, Loopback

RTP is sourced from NPANXXXXXX

To: NPANXXXXXX

From: NPANXXXXXX

  Call-ID: 4a03a38-7f000001-13c4-44a7-7da0b72b-44@XX.X.XXX.XXX

  CCM-ID: 57, SSRC: 281680964 (0x10ca1c44)

  Call-start (duration): 18 May 2015 11:55:22 (7.020 s)

  PDV (avg/max): 0/1 ms

  CODEC: G.711 u-law, 64000 bps

  DSCP: 46

  External delay sources:

    Round-trip delay (inst/avg/max): 13/13/13 ms

    One-way delay (inst/avg/max): 66/70/70 ms

    Origination delay (inst/avg/max): unavailable/unavailable/unavailable ms

    Termination delay (inst/avg/max): 60/67/70 ms

  Quality:

    R (LQ/CQ/G.107/Nominal): 93/92/92/93

    MOS (LQ/CQ/PQ/Nominal): 4.20/4.18/4.45/4.20

  Degradation:

    Echo level: 1.56%

    Packet loss: 0.00%

    Simulated jitter buffer discard: 0.00%

    Voice encode/decoder selection: 0.00%

    Recency: 0.00%

    Delay: 0.00%

    Signal level: 0.00%

    Noise level: 0.00%

  Burst / Gap / Loss:

    R-LQ (during burst): 92

    Burst count: 0

    Avg burst loss rate: 0.00%

    Avg burst length: 0 pkts (0 ms)

    Burst excess: 0 ms

    R-LQ (during gap): 92

    Gap count: 1

    Avg gap loss rate: 0.00%

    Avg gap length: 351 pkts (7.020 s)

    Gap excess: 0 ms

    Avg loss rate: 0.00%

    Avg discard rate: 0.00%

    Avg network loss rate: 0.00%

  Simulated jitter buffer:

    Configuration: Adaptive (min/nom/max): 10/50/200 ms

    PPDV (jitter): 0.1 ms

    Early threshold: 10.0 ms

    Early percentile: P100.00

    Early count (under threshold/total): 381/381 pkts

    Early peak: 1.0 ms

    Late threshold: 50.0 ms

    Late percentile: P100.00

    Late count (under threshold/total): 0/0 pkts

    Late peak: 0.0 ms

    Adaptive Increases/Decreases: 0/2

    Resyncs: 7

    Simulated jitter buffer delay (current/min/max): 40/40/50 ms

    Packets (rx/lost/out of seq/duplicate): 382/0/0/0

    Packets (early/late): 43/338

    Discards (total/overrun/underrun): 0/0/0

    Inter-arrival jitter: 0 ms

  External Quality Metrics:

    External R-LQ in: unavailable

    External R-LQ out: unavailable

    External R-CQ in: unavailable

    External R-CQ out: unavailable

  Fax / Modem Metrics:

    Estimated throughput: 35000 bps

    Reliability index (0-100): 100

   

Thank you,

Ken

Labels (2)
0 Kudos