Have a customer who has purchased a 908 to try to set up 4 digit dialing between a Cisco Call Manager and a Shoretel.
Their plan is to bring the SIP trunks from the Call Manager to the 908 and the PRI from the 908 to the Shoretel.
Any know gotcha's with integrating the Cisco SIP stack to the 908?
That should work without a problem.
If you run into any configuration issues please respond back.
I recommend allowing all voice traffic to flow through the Adtran and have the dial plan rules be handled by the Cisco and Shoretel.
voice grouped-trunk VOIP
trunk T01
accept $ cost 0
voice grouped-trunk PRI
trunk T02
accept $ cost 0
That should work without a problem.
If you run into any configuration issues please respond back.
I recommend allowing all voice traffic to flow through the Adtran and have the dial plan rules be handled by the Cisco and Shoretel.
voice grouped-trunk VOIP
trunk T01
accept $ cost 0
voice grouped-trunk PRI
trunk T02
accept $ cost 0
Thanks.
How many SIP trunks will be required from the Cisco? Will it require 23 SIP trunks if we are doing a full PRI?
If you will be doing a full PRI then yes you will need 23 channels.
Hello,
I went ahead and flagged this post as “Assumed Answered.” If any of the responses on this thread assisted you, please mark them as either Correct or Helpful answers with the applicable buttons. This will make them visible and help other members of the community find solutions more easily. If you still need assistance, please let us know in a reply.