cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
dfreeman7
New Contributor

Adtran total access 908e gen 3 PRI to Avaya MM710

Our carrier has installed two Pri's:

t1: esf framing
linecode: b8zs
PRI protocol: NI-2

Should be simple enough however I cant get my circuits to come up. I've installed several PRI's in the past but don't recall ever using a Adtran in place of the carrier's normal smart jack.

I'm assuming I'd use a T1 cross over cable.

Anything different about these 900e boxes I need to know ?

Thanks, Dan

 

 

 

0 Kudos
1 Reply

Re: Adtran total access 908e gen 3 PRI to Avaya MM710

May not need the crossover, i'd try a straight through to see if it comes up.