Apparently the Taqua T7000 does not recognize * codes on a sip trunk from a sip endpoint. I am using a 908e 3rd gen to provide fxs trunks here in our office. I would like to call forward 1 of those fxs (which registers as a sip subscriber in the T7) to a external number. The 908e takes and sets the call forward just as it is supposed to but I am getting a 403 forbidden from the Taqua switch. I have a ticket open with the folks at Taqua on this but thought someone on here may have already overcome this problem.
thank you
kenny
Kenneth, have you received any additional information ftom Taqua about why the call is being rejected? Thanks
Jay
Taqua says that they are receiving a 503 service not available from the 908e. That is doing the call forward local on the 908.
Kenny
Kenny, can you please reply with the config of the 900 as well as the output of the following 3 commands running together during a failed call:
debug sip stack message
debug voice verbose
debug isdn l2-f