I have a 7100 connected via SIP (subscriber) trunk to a Meta, on calls into the 7100, I get no ringback. I have been through the SIP config for Meta doc and also through some other related posts, but unable to find any resolution. I was wondering if someone could take a look and provide some help.
Ive attached a SIP stack debug, a voice verbose debug and the 7100 config.
Some details: the ip of the 7100 is 209.23.96.57 set on eth 0/0, the Meta CFS is xxx.xxx.145.5, Im calling from my cell to the 7100, DID is xxxyyy9097 which is set of ext 221.
Thanks,
Greg
Thanks for posting your question to the Support Community! Your attachments contained public IP addresses and phone numbers so I removed them as a precaution. I looked through the debug and I did see where the NetVanta 7100 sent a 180 Ringing to the Metaswitch:
19:01:05.331 SIP.STACK MSG Tx: UDP src=x.x.96.57:5060 dst=x.x.145.5:5060
19:01:05.331 SIP.STACK MSG SIP/2.0 180 Ringing
19:01:05.332 SIP.STACK MSG From: 'Anonymous'<sip:anonymous@x.x.145.5:5060>;tag=10.10.30.11+1+2b0713+8019a214;isup-oli=00
19:01:05.332 SIP.STACK MSG To: <sip:xxxyyy9097@209.23.96.57>;tag=57a4680-7f000001-13c4-125d5-3d1971f9-125d5
19:01:05.332 SIP.STACK MSG Call-ID: DB02455F@10.10.30.11
19:01:05.332 SIP.STACK MSG CSeq: 350169421 INVITE
19:01:05.332 SIP.STACK MSG Via: SIP/2.0/UDP x.x.145.5:5060;branch=z9hG4bKf0mjqr304g70bg4e71k1.1
19:01:05.332 SIP.STACK MSG Contact: <sip:xxxyyy9097@209.23.96.57:5060;transport=UDP>
19:01:05.333 SIP.STACK MSG Supported: 100rel,replaces
19:01:05.333 SIP.STACK MSG Allow: ACK, BYE, CANCEL, INFO, INVITE, NOTIFY, OPTIONS, PRACK, REFER, REGISTER
19:01:05.333 SIP.STACK MSG User-Agent: ADTRAN_NetVanta_7100/R10.8.0.E
19:01:05.333 SIP.STACK MSG Content-Length: 0
I saw you mentioned going through our guide and looking at similar posts, but I wanted to call attention to two in particular:
The last part of the guide and the post both cover that the Metaswitch has to be provisioned with certain parameters for this to work properly. Can you verify the Metaswitch has been configured to match pages 13 and 14 of the guide?
After verifying that, if you are still having trouble I would like to see the output of a debug sip stack messages and debug voice verbose (both enabled at the same time in the same text file) and the current configuration. You can follow the instructions below to submit the files to our FTP server so you don't have to strip out sensitive information:
Open Internet Explorer web browser on their PC
Type the following URL: ftp://ftp.adtran.comPress the Alt key, click View, and then click Open FTP Site in Windows Explorer
Double-click the "Incoming" folder
Drag and drop files from PC into the Internet Explorer windowReply to this post with the exact filenames used so we can retrieve the files
Thanks,
Matt
Thanks for posting your question to the Support Community! Your attachments contained public IP addresses and phone numbers so I removed them as a precaution. I looked through the debug and I did see where the NetVanta 7100 sent a 180 Ringing to the Metaswitch:
19:01:05.331 SIP.STACK MSG Tx: UDP src=x.x.96.57:5060 dst=x.x.145.5:5060
19:01:05.331 SIP.STACK MSG SIP/2.0 180 Ringing
19:01:05.332 SIP.STACK MSG From: 'Anonymous'<sip:anonymous@x.x.145.5:5060>;tag=10.10.30.11+1+2b0713+8019a214;isup-oli=00
19:01:05.332 SIP.STACK MSG To: <sip:xxxyyy9097@209.23.96.57>;tag=57a4680-7f000001-13c4-125d5-3d1971f9-125d5
19:01:05.332 SIP.STACK MSG Call-ID: DB02455F@10.10.30.11
19:01:05.332 SIP.STACK MSG CSeq: 350169421 INVITE
19:01:05.332 SIP.STACK MSG Via: SIP/2.0/UDP x.x.145.5:5060;branch=z9hG4bKf0mjqr304g70bg4e71k1.1
19:01:05.332 SIP.STACK MSG Contact: <sip:xxxyyy9097@209.23.96.57:5060;transport=UDP>
19:01:05.333 SIP.STACK MSG Supported: 100rel,replaces
19:01:05.333 SIP.STACK MSG Allow: ACK, BYE, CANCEL, INFO, INVITE, NOTIFY, OPTIONS, PRACK, REFER, REGISTER
19:01:05.333 SIP.STACK MSG User-Agent: ADTRAN_NetVanta_7100/R10.8.0.E
19:01:05.333 SIP.STACK MSG Content-Length: 0
I saw you mentioned going through our guide and looking at similar posts, but I wanted to call attention to two in particular:
The last part of the guide and the post both cover that the Metaswitch has to be provisioned with certain parameters for this to work properly. Can you verify the Metaswitch has been configured to match pages 13 and 14 of the guide?
After verifying that, if you are still having trouble I would like to see the output of a debug sip stack messages and debug voice verbose (both enabled at the same time in the same text file) and the current configuration. You can follow the instructions below to submit the files to our FTP server so you don't have to strip out sensitive information:
Open Internet Explorer web browser on their PC
Type the following URL: ftp://ftp.adtran.comPress the Alt key, click View, and then click Open FTP Site in Windows Explorer
Double-click the "Incoming" folder
Drag and drop files from PC into the Internet Explorer windowReply to this post with the exact filenames used so we can retrieve the files
Thanks,
Matt
I went ahead and flagged the "Correct Answer" on this post to make it more visible and help other members of the community find solutions more easily. If you have any additional information on this that others may benefit from, please come back to this post to provide an update. If you still need assistance, we would be more than happy to continue working with you on this - just let us know in a reply.
Thanks,
Matt