Hi Jay, I installed the latest Firmware update and it appears to be working correctly now. Thank you.
dnoyes,
Thank you for posting this question to the Support Community. This depends on your setup. What type of trunks are you using (PRI, analog, SIP)?
Thanks,
Matt
These would be PRI trunks.
Sent from my Windows Phone
This can vary depending on specific call flows. You can enable an ISDN debug with the command debug isdn l2-formatted and see what response is sent from the NetVanta 7100. If we send an ALERTING message to the provider they should play ringback.
Thanks,
Matt
Hi Matt, when I tested this I didn’t see anything come up on the debug screen.
Hi Matt, I did some more testing and if I call a direct line (DID) I get a ring back but it take a long time to kick in. It will ring on the receiving end twice before you hear it on the dialing end.
Dnoyes, can you please post your configuration with any sensitive information removed? Thanks
Jay
Hi Jay, I installed the latest Firmware update and it appears to be working correctly now. Thank you.
dnoyes,
Thanks for the update. Can you come back to this post and mark your last response as the correct answer and any other responses that were helpful with the applicable buttons (when you are logged in)? That will mark this thread as containing an answer and help make it more visible to other users.
Thanks,
Matt