Adtran
Help
The Adtran community holiday season is starting next week! The holiday period will span from December 21, 2024 to January 6, 2025. During this time, responses to feedback form submissions may be delayed. If you are encountering product issues, you can reach out to Adtran support at any time.
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Show  only  | Search instead for 
Did you mean: 
pirrus
New Contributor
‎10-13-2014 12:35 PM

Polycom IP 450 cannot find boot server on Netvanta 7100

I have Polycom IP 450 phones on Netvanta 7100.

When they boot, the default mode is DHCP, they contact the TFTP server, correctly populate the FTP field, login, and password, and then hang for a long time, cannot find (or login to) boot server,

and keep endlessly booting, and rebooting.

I tried to access FTP server manually from the browser, but cannot do it either.

There was 1 time out of 20-30 attempts when a brand new IP 450 was able to load everything correctly, and register. Even in that case, when disconnected, and connected again ended up in endless boot.

0 Kudos
Reply
1 Reply
Anonymous
Not applicable
‎10-15-2014 09:22 AM

Re: Polycom IP 450 cannot find boot server on Netvanta 7100

Are the phones plugged in directly to the 7100 or are they going through a connected PoE switch?

Telnet to the 7100 and run the following debugs:

Debug ip ftp-server

Debug ip dhcp server

If not plugged in directly, then plug the phone in directly. When the phone is booting up, you will see a cancel button, press it and then enter 4,6,8,* to default the phone, then when prompted for passcode enter 456. The phone will then boot up.

Copy the debug to a text file and then attach it to your reply.

-Mark

0 Kudos
Accept as Solution Reply