cancel
Showing results for 
Show  only  | Search instead for 
Did you mean: 
harleyl
New Contributor

Customer can't forward their analog FXO to their night answering service.

Customer needs to forward their main number to answering service at night. Analog trunks are set up as SLA on the 7100. When you dial the forwarding code ie. *72+answering service number, it times out and gives a busy signal.

Labels (1)
0 Kudos
2 Replies
Anonymous
Not applicable

Re: Customer can't forward their analog FXO to their night answering service.

Pat, by default the 7100 handles processing of all SPRE codes locally. You can change this under "System Parameters" by switching "SPRE Handling Mode" to Network, however that would break any local SPRE codes you use on the 7100, so there would be a trade-off in either configuration. Thanks

Anonymous
Not applicable

Re: Customer can't forward their analog FXO to their night answering service.

Pat, correction to that, you can override specific SPRE codes, but only from the CLI. The command would be "voice spre-mode override *72", which would cause that code to get processed by the network while all others are processed by locally. Thanks